New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Windows & Doors in San Marcos, TX | Hale Windows Austin
We provide independent ECO Window Systems service across San Marcos, from Window Repair in San Marcos and glass replacement to full-frame window and door installation. What sets our San Marcos work apart is that we know exactly how this town’s freeze-thaw clay, hail, and brutal UV exposure wears down ECO vinyl and aluminum frames, and we quote every job in writing before we start. Call (254) 736-6486 for a free estimate from a crew that works on ECO frames here almost weekly.
We’re not an ECO Window Systems dealer or manufacturer affiliate. We’re an independent service provider that has spent years repairing and replacing ECO product lines in San Marcos service area homes, and we stock parts for the models most common in this market. Spencer Odell, our owner, learned the trade at Los Angeles Trade-Technical College and has spent nearly two decades measuring and finishing windows across the Southwest. He’s the one who catches the quarter-inch-out-of-plumb frame that the last installer walked past.
Why San Marcos Residents Choose Us for ECO Window Systems Service
Most window companies in San Marcos will sell you whatever brand they carry. We’d rather fix what you already have, if the frame is sound, and tell you straight when it isn’t. That’s the difference that comes from working on ECO Window Systems frames nearly every week in this city, not reading about them in a catalog.
Our ECO Window Systems sales & service approach covers the four series we see most often in San Marcos homes: the 3000 Series Double-Hung, 7000 Series Horizontal Roller, Premium Casement, and Classic Single-Hung. We know which corner welds crack first on west-facing walls, which roller assemblies seize up from wind-driven dust, and which IGUs fog out after ten years of Hill Country sun. Parts are matched to the original profile where OEM makes sense, and upgraded where factory parts simply fail too fast in this climate.
Every technician who arrives at your door is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the visit. That’s our Threshold Standard, and it matters in a town where a lot of people answer the door to a stranger they found on the internet. Written price before the work starts. A 365-Day Done Right Promise if it isn’t right. No argument needed.
Common ECO Window Systems Windows & Doors Problems We Solve in San Marcos
- Corner weld warping and sash drag on double-hungs. San Marcos heat sits on vinyl like a press. The corner welds on ECO 3000 Series double-hungs are usually the first failure point on west- and south-facing elevations. You’ll feel the sash catch mid-travel, or see daylight at a corner. We repair the weld where the frame is intact and replace the frame where it isn’t.
- Fogged glass from failed IGUs on east-facing 3000 Series windows. Morning sun on east walls heats the glass, the edge seal gives up, and moisture sneaks between the panes. We install heat-sealed aftermarket IGUs that hold up better than factory units in this climate.
- Stripped or corroded roller assemblies on 7000 Series sliders. Wind-driven dust off the Balcones Escarpment and summer humidity eat at the factory roller hardware. You’ll hear gravel-like grinding, or the panel will simply drag. We replace rollers with marine-grade hardware that handles the grit.
- Sticking sashes tied to pier-and-beam foundation movement. San Marcos sits on expansive blackland clay. When the clay shrinks and swells through freeze-thaw cycles, pier-and-beam houses move, and window frames twist with them. A sticking sash is often a frame problem, not a hardware problem. We level and reset before anything else.
- Cracked glass from hail strikes, especially west of I-35. The limestone hills take harder hail exposure than the river-bottom neighborhoods. Cracked panes on ECO units are common, and if the frame survived the strike, we can usually replace the glass without pulling the whole unit.
ECO Window Systems Service in San Marcos: What Local Conditions Mean for Your Equipment
The hills west of I-35 sit on exposed limestone with almost no tree canopy, so ECO windows out there face roughly twice the UV and hail exposure of shaded river-bottom properties along the San Marcos River. That one geographic fact dictates whether we recommend rebuilding a frame or moving to impact-rated glass. A 3000 Series double-hung with original glass on a treeless ridge near Wimberley Road is in a different fight than the same window under a pecan canopy off Craddock Avenue. We read the site before we write the quote, and we price the repair honestly either way.
Last August we pulled four ECO 3000 Series double-hungs from a 1980s pier-and-beam on Craddock Avenue near the university. Every sash had fogged glass, and the corner welds were cracked from clay soil shifting under the house. We installed new heat-sealed IGUs, reinforced the frames, and reset each unit square. The homeowner told us the west bedrooms finally held cool air past noon. That’s the kind of repair San Marcos houses need: specific to the soil and the sun, not a generic glass swap.
ECO Window Systems Models & Products We Service in San Marcos
We service the ECO product families most common in San Marcos stock: ECO 3000 Series Double-Hung, ECO 7000 Series Horizontal Roller, ECO Premium Casement, and ECO Classic Single-Hung. On the repair side, we use OEM rollers, locks, and balances where they hold up, and we upgrade to heat-sealed IGUs and marine-grade hardware where the factory parts are the reason you’re calling us in the first place.
Spencer Odell keeps a rolling inventory of ECO-compatible parts for San Marcos jobs, so we aren’t waiting a week on a roller assembly when your slider is stuck half open. For our Window Replacement in San Marcos and insert window replacement, we’ll write you an honest comparison between repairing what’s there and moving to a modern unit that handles Texas heat better. The quote is free, the recommendation is straight.
ECO Window Systems Service Pricing in San Marcos
Plan on these ranges for ECO work in San Marcos:
- IGU replacement (fogged glass): $185 – $420 per sash, depending on size and glass package
- Roller and lock hardware replacement: $90 – $220 per window
- Corner weld repair with sash realignment: $160 – $310 per window
- Full-frame replacement (installed, standard size): $550 – $980 per opening
- Insert window replacement over sound frame: $400 – $750 per opening
What changes the price in San Marcos is elevation: second-story work, the distance a crew has to carry equipment on pier-and-beam foundations, and whether the original frame is square or needs resetting after clay movement. Your free estimate includes a written line-item price, so you know the number before we touch a screw. Call (254) 736-6486 and we’ll get you one.
Serving San Marcos, TX - Our Local Coverage Area
We’re based in the San Marcos area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ECO Window Systems Windows & Doors in San Marcos
The roller assemblies are picking up wind-driven dust and grit, and the summer humidity is accelerating corrosion on the factory hardware. It’ll keep getting worse until the rollers are cleaned and rebuilt or replaced with marine-grade parts. Call (254) 736-6486 and we’ll give you a written quote for the repair.
If the frame is cracked through a corner weld or the frame channel is bent, replacement is usually the right call. If the glass is cracked but the frame is square and sound, a glass replacement handles it. We’ll inspect the unit and tell you which one you’re actually looking at, in writing, before anything is ordered.
Usually both. San Marcos blackland clay moves pier-and-beam houses more than most people realize, and that movement twists window frames out of square. The sticking you feel is the symptom. We check the frame for level and plumb before touching hardware. If the house has moved, the real fix is resetting the window square, not forcing the sash.
We keep OEM-compatible rollers, locks, balances, and aftermarket IGUs in local stock for the ECO series most common in San Marcos. If your specific part isn’t on the truck, we’ll know when we write the quote, not after we’ve taken your window apart.
Yes. Insert window replacement fits new energy-efficient units inside the existing frames, preserving your siding and interior trim. It’s a faster job than full-frame replacement and a good fit for the 1960s-1980s ranches across San Marcos. Call (254) 736-6486 for a free estimate on your specific windows.
Service Areas Near San Marcos
We run ECO Window Systems service from San Marcos north through Kyle and Manor, up to ECO Window Systems service in Austin and ECO Window Systems service in Round Rock, and east to Hutto. Our trucks are on the I-35 corridor every week.
Book Your ECO Window Systems Service in San Marcos Today
Tell us what your windows are doing, and we’ll schedule a visit that starts with a written quote. Same-day appointments are often available for stuck sliders and cracked glass. Call (254) 736-6486.
Written by Spencer Odell, Owner at Hale Windows Austin, serving San Marcos since 2009.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.