New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Front Door Replacement in Austin: What to Know First
CGI front door replacement in Austin typically runs $1,800 to $5,400 for a complete tear-out and new unit install, with most jobs finishing in one to two days once the door arrives. We’re an independent CGI service provider, not a factory-authorized dealer, so when a CGI door fails, we diagnose it on its own terms and quote you a written price before any work starts. This page is for homeowners with a CGI front door that’s warped, rusting at the seams, leaking air, or simply tired, and who need to know exactly what replacement looks like, what it costs, and who’s walking through the door to do it.
If you already know your CGI door is done, call (254) 736-6486 and we’ll schedule a free estimate. If you’re still deciding, keep reading.
How CGI Products Fail – and How We Fix Them
- Rust bloom at the bottom rail on CGI Estate Collection doors. Austin’s humidity cycles plus irrigation overspray wick moisture into the aluminum frame at the threshold. Once the factory powder coat gets a pinhole, the aluminum underneath starts oxidizing and swelling. By the time you see bubbling paint, the rail is usually compromised. We cut out the section, inspect the internal reinforcement, and replace the rail with a corrosion-inhibited aftermarket extrusion when a full door swap isn’t warranted yet. If the rust has reached the hinge stile, we recommend replacement and tell you why.
- Warped center stiles on CGI Designer Series entry doors. Direct afternoon sun on west-facing entries in Austin neighborhoods like Circle C and Steiner Ranch heats the door surface unevenly. Aluminum expands, but when one side is shaded and the other is baking, the frame torques. You’ll notice the deadbolt starts catching or the door needs a shoulder to latch. We check the reveal with a feeler gauge; if it’s out more than 1/8 inch, we replace the panel rather than shimming a twisted door into a straight frame, which just kicks the problem down the road.
- Sagging hinges on older-model CGI doors with external hinge screws. Ten or fifteen years of Texas heat cycling loosens the fastener threads in the jamb, and then the full weight of the door rides on two screws instead of six. That’s why your door scrapes the threshold only in August. We pull the door, repair or sister the jamb material, and remount with through-bolted hinges, which is stronger than factory stock. If the jamb itself has split, we reframe the opening before hanging the new door.
- Seized multipoint lock mechanisms on CGI impact-rated doors. Austin’s fine caliche dust works its way into the lock channel and mixes with factory grease into a paste. Homeowners crank the handle harder, the gear strips, and now the door won’t lock at all. Multipoint hardware isn’t something you lube and forget; on a CGI front door replacement, we upgrade to a current-generation lock body with sealed internals, which handles our dust better than the older open-gear design.
- Failed IG units (insulated glass) in CGI doors with decorative glass inserts. If the glass in your CGI front door fogs between the panes, the seal has failed and you’re looking at replacement, not repair. The good news: you can replace just the glass cartridge on most CGI Estate and Designer doors if the frame is still sound, which saves you around 60% versus a full door swap. We’ll tell you honestly if your frame is worth saving or if you’re throwing good money after bad.
Our CGI Front Door Replacement Process
- 1
Call and schedule. A live person answers at (254) 736-6486. We set a time and send you the technician’s name and photo before they arrive, per our Threshold Standard: background-checked, identity-verified, photo-badged, and pre-announced.
- 2
On-site diagnostic. We measure the existing door, check the frame for square and plumb, inspect the subfloor at the threshold, and identify exactly why the current CGI door failed. We also confirm your rough opening against the replacement unit’s requirements.
- 3
Parts decision. We show you two options when both exist: OEM CGI components (which preserve any remaining factory warranty language) versus quality aftermarket replacements (which often arrive faster and cost 15-30% less). We recommend the aftermarket route only when the material spec matches or exceeds factory.
- 4
Installation. We pull the old unit, address any concealed damage to the rough opening, dry-fit the new door, and anchor it square and plumb. Flashing at the sill and jambs is done to Austin’s wet-weather reality, not a generic spec.
- 5
Adjustment and testing. We set the reveal with a feeler gauge, cycle the door fifty times under load, and check the deadbolt throw and multipoint engagement. If it binds, we fix it now, not on a callback.
- 6
Cleanup and guarantee. We haul away the old door and hardware, sweep the threshold, and walk you through what we did. Every job carries our 365-Day Done Right Promise: if it’s not right, we make it right, no argument needed.
What CGI Front Door Replacement Costs in Austin
| Scenario | Typical Cost Range in Austin |
|---|---|
| Replace glass cartridge only (frame intact) | $400 – $900 |
| Replace door slab only (frame and hinges reusable) | $1,100 – $2,200 |
| Full tear-out and new pre-hung CGI door | $1,800 – $5,400 |
| Full replacement with custom sizing or impact rating | $5,400 – $8,000+ |
What moves the price: whether your rough opening is standard or needs reframing, whether you need an impact-rated unit (common in flood-prone or high-wind areas near Lake Travis), whether the threshold and subfloor are rotted, and whether you choose OEM or quality aftermarket components. We put the price in writing before any work begins, and that’s the price you pay. Call (254) 736-6486 for a free, line-item estimate.
Why Austin Homeowners Call Hale Windows Austin for CGI Work
Spencer Odell has been measuring, framing, and finishing doors and windows across the Southwest for nearly two decades, and he’s the first to say that a window that almost fits is a window that leaks. His crew has replaced a lot of CGI front doors in Austin over the years, which means when a technician shows up at your door, they’ve seen your exact failure mode before and they know the fix without a training video.
We carry eight professional window and door lines, including PGT, CWS, ES Windows, ECO Window Systems, and Therma-Tru, so when a CGI replacement isn’t the smartest use of your money, we’ll say so and show you a comparable alternative instead of pushing a brand you didn’t ask for. Every job gets a written price before work starts, every repair gets a written guarantee with a free second visit if it fails, and everything we do is covered by our 365-Day Done Right Promise.
FAQs
Replacing your CGI front door does not automatically void any remaining warranty on other CGI products in your home, since each unit carries its own coverage. However, if you’re within the original warranty period, you’ll want to file a claim before doing a full replacement, because once the door is removed and the job is done through an independent service provider like us, the manufacturer typically considers that unit’s warranty closed. We’ll help you understand your coverage before we ever touch the door.
Yes, in many cases. If the frame is square, the slab isn’t warped, and the failure is isolated to a hinge, a lock mechanism, or the glass cartridge, a repair makes sense and runs a fraction of replacement cost. But when the frame is twisted, the bottom rail is rusted through, or the door no longer sits plumb, we’ll tell you straight: replacement is cheaper in the long run. Call (254) 736-6486 and we’ll give you an honest recommendation, not a sales pitch.
Most CGI front door replacements in Austin are done in one to two days once the new unit is on site. The variable is parts lead time: OEM CGI components can take two to six weeks depending on the model, while quality aftermarket replacements are often available in one to two weeks. A custom-sized or impact-rated unit can add another week or two. We’ll give you a timeline in writing with your estimate.
We use OEM CGI parts by default when they’re available and cost-effective. When lead times are long or the factory price is out of line, we offer quality aftermarket components that meet or exceed the original spec, and we show you the difference in writing before you choose. You’ll always know what’s going into your door and why.
Written by Spencer Odell, Owner, Hale Windows Austin at Hale Windows Austin, serving Austin and nearby areas.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.