New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Front Door Replacement in Austin: What to Know First
Therma-Tru front door replacement in Austin typically runs between $1,800 and $4,200 installed, depending on the door line, glass configuration, and whether the existing frame can be saved. As an independent Therma-Tru service provider, we replace entry systems in three to five business days once your door arrives, and you’ll have a written price in hand before we order a single component. Nobody should pay for a door they haven’t seen priced line by line.
This page is for Austin homeowners who already own a Therma-Tru door and need it replaced, not for tire-kickers browsing brands. If your Therma-Tru door has a warped slab, a failing frame, or glass that’s fogged beyond saving, you’re in the right place. Call (254) 736-6486 and we’ll talk through what you’re seeing.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru builds a solid door, but Austin’s climate finds the weak spots. Here’s what we see most often on Therma-Tru front doors in Austin homes, and what we actually do about it.
- Classic-Craft and Fiber-Classic slab warping at the lock stile. Therma-Tru’s fiberglass skins are tough, but the polyurethane core expands and contracts with Austin’s temperature swings. Over time, the stile edge can bow just enough that the deadbolt no longer lines up. We see this constantly on western-facing doors in Rosedale and Allandale that eat afternoon sun. The fix is a new slab, not a hinge adjustment. Once the core has set in a bowed position, no amount of hinge shimming brings it back.
- Bottom sweep and threshold rot on Pulse and Benchmark series. Austin gets roughly 34 inches of rain a year, but it comes in bursts. When a Therma-Tru door sits under an overhang that’s too shallow, water splashes up and sits at the threshold. The adjustable aluminum threshold is fine, but the wood sub-sill underneath isn’t. We pull the threshold during replacement and install a composite sill pan so the next door isn’t sitting directly on lumber that will hold water.
- Fogged decorative glass in Classic-Craft Mahogany and Rustic collections. Therma-Tru’s triple-pane decorative glass units carry a 20-year warranty from the manufacturer, but the labor to swap them is on you after year one. Austin’s humidity means a failed seal shows up fast as interior fogging. Sometimes replacing the glass unit makes sense. More often, if the frame is more than twelve years old, a full slab replacement with fresh glass is the better money.
- Sill pan corrosion on doors installed before 2010. Older Therma-Tru installs in Austin often used aluminum sill pans that weren’t sloped properly. Twenty years of gutter overflow later, the pan is pitted and the door frame corners are soft. We replace the entire entry system with a properly sloped composite pan and flash the rough opening correctly.
- Hinge side frame splitting on Smooth-Star models. The Smooth-Star is Therma-Tru’s value line, and the frame material is thinner than what you get on Classic-Craft. In Austin’s clay soil, homes shift, and a settling foundation twists the rough opening just enough to stress the hinge screws. The frame splits along the grain. We reinforce the rough opening and install a sturdier frame, not just longer screws.
Our Therma-Tru Front Door Replacement Process
Every Therma-Tru replacement in Austin follows the same sequence. No shortcuts, no surprises.
- 1
You call and describe the door. We’ll ask what model you have, roughly when it was installed, and what’s failing. A live person answers, day or night, at (254) 736-6486.
- 2
We come out and take measurements. Spencer Odell or one of our senior installers measures the rough opening, the slab, the reveal gaps, and the threshold height. We check whether the frame is salvageable. This is where the quarter-inch-out-of-plumb problems get caught before anyone orders a door.
- 3
We write the price down. You get a line-item quote showing the slab, frame components, hardware, glass, and labor. Nothing verbal, nothing vague. The price you sign is the price you pay.
- 4
We order Therma-Tru or the right aftermarket part. For warranty-safe replacements, we use Therma-Tru components that match the existing system. For older doors where the OEM part is discontinued, we use aftermarket parts from manufacturers we’ve tested on Austin homes. We tell you which is which and why before ordering.
- 5
We install, seal, and test. The old door comes out, the rough opening gets inspected and corrected, the new door goes in with a proper sill pan and flashing. We run the door through open-close cycles, check the deadbolt throw, and test for daylight around the perimeter.
- 6
You get the 365-Day Done Right Promise in writing. If anything is not right, we come back and make it right. No argument, no invoice.
What Therma-Tru Front Door Replacement Costs in Austin
Here’s what we tell Austin homeowners when they ask about money. These are installed prices with our labor, written down before the job starts.
- Smooth-Star slab replacement, no glass: $1,800 to $2,400
- Classic-Craft slab with decorative glass, frame reused: $2,800 to $3,800
- Full entry system replacement (slab, frame, sill pan, hardware): $3,200 to $4,500
- Benchmark or Pulse entry with side lites: $3,800 to $5,500
What moves the price: glass configuration, frame condition after we open the wall, trim damage, and whether the rough opening needs structural correction. Austin’s soil movement means maybe one in five doors we replace needs some framing work before the new door goes in. You’ll know if yours does before we order anything. Call (254) 736-6486 for a free estimate with real numbers.
Why Austin Homeowners Call Hale Windows Austin for Therma-Tru Work
Plenty of contractors in Austin will swap a door. Fewer will measure the existing Therma-Tru reveal gaps before they order the replacement, and fewer still will tell you the difference between an OEM threshold and an aftermarket one that saves you $80 but warps in the first August heat wave. We’ve been working with Therma-Tru products since 2009, long enough to know which repairs the manufacturer’s warranty covers and which ones you’re better off paying for out of pocket.
And when a Therma-Tru door isn’t the right fix, we say so. We also install and service PGT, CGI, CWS, and ES Windows products, so if your door opening has water damage that calls for a different frame approach, we’re not trying to force a Therma-Tru box into a hole it doesn’t fit. Every technician who arrives at your Austin home is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before they knock. You’ll know exactly who’s at your door before you open it.
FAQs
No. Replacing a failed Therma-Tru slab or full entry system with an OEM Therma-Tru product keeps the manufacturer’s warranty intact on the new components. When we use aftermarket parts, we’ll tell you exactly how that affects any remaining warranty coverage before we order. Call (254) 736-6486 and we’ll walk through your specific door’s warranty status.
Once your replacement door or parts arrive, the on-site work is typically done in a single day. Full entry system replacements with framing correction can take a second morning. Parts and door orders from Therma-Tru usually arrive within one to three weeks depending on glass configuration. We’ll give you a firm timeline when we hand you the written quote.
If the frame is sound, the rough opening is dry, and the sill pan drains correctly, a slab replacement saves you money. If there’s any soft wood at the corners, a rotted sub-sill, or daylight around the frame after a heavy Austin downpour, replace the entire system. We’ll open the interior casing and show you exactly what we’re seeing before advising you either way.
Yes, for most Classic-Craft, Fiber-Classic, and Smooth-Star models. Therma-Tru’s finishing system means the new slab arrives primed and we coordinate the paint or stain to match your existing trim. For doors older than ten years, the existing finish has weathered enough that a spot match is difficult, but a full exterior refinish during replacement gives you a clean, consistent look across the whole entry.
Most direct door replacements in Austin do not require a building permit when the rough opening is not modified. If we find structural issues that require reframing, we’ll handle the permit. You’ll never be asked to pull one yourself.
Written by Spencer Odell, Owner, Hale Windows Austin at Hale Windows Austin, serving Austin and nearby areas.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.