New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Door Installation: The Austin Owner’s Guide
Therma-Tru door installation in Austin typically runs $850 to $2,400 installed, depending on whether we’re replacing a slab, a pre-hung unit, or a full frame-and-sidelight assembly. Most Therma-Tru doors we install are done in a single day, and we stock common door installation hardware on our trucks so the job doesn’t stall waiting on a part. The way most Austin homeowners find us is simple: the door that worked fine for a decade suddenly binds at the top corner, or the threshold starts letting afternoon light through, or the sweep drags a groove into the tile every time it swings. Therma-Tru builds a solid door, but the parts around it, the hinges, the sill, the weatherstripping, take the daily abuse of Texas sun and humidity.
Key Takeaways:
- Installed Therma-Tru door replacement in Austin: $850 to $2,400 depending on scope
- We work on Therma-Tru slab, pre-hung, and frame-and-sidelight configurations
- OEM and quality aftermarket parts matched to your specific Therma-Tru model
- Written price before work begins, 365-Day Done Right Promise on every job
- Threshold Standard: technician’s name and photo sent to you before the visit
Which Therma-Tru Models This Applies To
We install and service the Therma-Tru lines most common in Austin homes: the Classic-Craft, Fiber-Classic, and Benchmark series, along with the Pulse and Smooth-Star entry doors. The compatibility gotcha most owners hit is this: Therma-Tru weatherstripping and sweeps are profile-specific. A sweep from a Smooth-Star will not seat correctly on a Classic-Craft bottom rail, and the part numbers are stamped on the back side of the sweep, not the face you see. If the stamp is gone, we match by profile shape and door thickness. Austin homes built in the 1990s and 2000s, especially in neighborhoods like Tarrytown, Rosedale, and Allandale, tend to have Fiber-Classic or Smooth-Star original units that are now two decades into a lifespan that Texas heat shortens by a measurable margin. Therma-Tru sells replacement weatherstripping, sweeps, hinges, and sills both OEM and through licensed aftermarket suppliers. On older Therma-Tru models, we often recommend aftermarket equivalents that changed material spec in ways that hold up better here. Hale Windows Austin is independent of Therma-Tru, and that independence matters most when OEM compatibility stops making sense for your specific door. We also stock parts for PGT, CGI, and CWS doors, so if your Therma-Tru is paired with a sidelight from a different manufacturer, we can service both sides of the opening without two vendors.
Signs Your Therma-Tru Door Installation Is Failing
- Daylight visible under the door with the sweep down. This is usually a worn or cracked sweep and threshold cap. In Austin, years of UV exposure turns Therma-Tru vinyl sweeps brittle, and once the corner wicks water, the threshold core starts to rot from inside.
- Door binds at the top latch corner and won’t close without a shove. Heat and humidity cycles work on the hinge screws and the frame becomes slightly out of alignment. Austin’s summer-to-winter delta warms the frame enough that a door that was hung true in March can shift a quarter-inch by July.
- Drafts you can feel around the frame even when the door is locked. This points to failed or compressed weatherstripping. Therma-Tru’s dual-fin strips are good, but they flatten permanently after years of compression and no longer seal against the door edge.
- The door rattles in high wind or when a truck rolls by. Rattling means the door slab has moved off the weatherstrip plane. Sometimes it’s a bent hinge, sometimes it’s a weatherstrip backing that’s lost its grip. Either way, air and sound are getting through.
- Visible rust on the hinge pins or the bottom sweep drags and squeaks. Hinge wear is the most common single point of failure on Therma-Tru doors in Austin. When the bottom hinge sags, the whole door wrong-loads the top hinge, and everything wears faster. Replacing the part before the frame takes damage saves hundreds.
Replacement Cost & What’s Included
| Service | Installed Price Range | What’s Included |
|---|---|---|
| Weatherstrip and sweep replacement | $145 – $320 | OEM or aftermarket strips matched to your Therma-Tru profile, door tested for seal, written 1-year parts plan |
| Threshold and sill replacement | $210 – $485 | Rot inspection, threshold cap or full sill, water test with spray |
| Hinge replacement (full set) | $180 – $395 | Matching finish hinges, frame reinspection, door re-hung and tested |
| Slab replacement (door only, existing frame) | $850 – $1,400 | New Therma-Tru or aftermarket slab, hinges, sweep, handle prep, hanging and test |
| Full pre-hung replacement with frame | $1,500 – $2,400 | Complete door, frame, threshold, trim, all parts, written warranty |
What drives the range in Austin is almost always the condition of the frame and sill, and the width of the surrounding trim. Older Tarrytown bungalows run narrower and often need re-shimming, where a standard-width rough opening in a newer build doesn’t. Every Therma-Tru installation from Hale Windows Austin gets a written line-item price before we touch the door, so you know exactly where your dollars go. Parts and labor are listed separately. The 365-Day Done Right Promise applies to the entire installation: if it isn’t right, we make it right, no argument, no back-billing.
DIY or Call Us?
What an owner can safely do, and what we tell friends to check: inspect the sweep for cracks, look at the weatherstrip backing for separation, and check the hinge screws for tightness. A snugging up of a loose hinge screw is a five-minute fix and we’re happy to tell you over the phone if that’s all you’re dealing with. Where DIY goes wrong on Therma-Tru doors is when the slab comes out of the frame and the shims shift, or when a homeowner tries to solve a sag with a long screw through the top hinge without knowing the frame behind it. The door goes back in just proud enough to leak, or the hinges bind, or the threshold no longer seals. None of it shows up on the first day. Spencer Odell has been measuring and hanging doors across the Southwest for nearly two decades, and the failure he still sees most often from the DIY route is a misjudged reveal that lets air in for months before anyone sees daylight. If you’re not sure what you’re looking at, call (254) 736-6486 and describe the door. We can usually tell you over the phone whether it’s worth a service call.
FAQs
The slab itself often lasts 25 to 30 years, but the weatherstripping, sweep, and hinges that make it seal correctly usually need replacement every 7 to 12 years in Austin’s climate, sooner on west-facing doors that catch full afternoon sun. The UV and heat cycling take out weatherstripping before they take the door slab. For an exact assessment of your door, call (254) 736-6486 and we’ll take a look.
Yes, in most cases. If the slab is solid and the frame is straight, weatherstripping, sweep, hinges, or threshold replacement fixes the door for a fraction of full replacement cost. We replace the door only when the core has taken water, the frame has rot, or the geometry is no longer worth fighting. A written quote tells you which one you’re looking at before anyone starts work.
A weatherstrip, sweep, or hinge replacement runs 90 minutes to half a day. A slab replacement runs most of a day. A full pre-hung replacement with frame and trim runs a full work day, sometimes a day and a half if the rough opening needs shimming. We’ll give you a written time estimate with the price, not after we start.
We stock common sweep profiles, weatherstripping, hinges, and threshold caps in the most-used Therma-Tru sizes and profiles for Austin homes. For less common or older model-specific parts, we source direct and typically have them within a few business days. We never pattern-match a sweep and hope, we match by model, profile shape, and measured door thickness.
Yes. The written price is the price. If we open the frame and find something unexpected, we stop, show you, and hand you a written change before any additional work. No change orders appear on the invoice that you didn’t sign. That’s the Hale Windows Austin way, and the 365-Day Done Right Promise backs every part of the job.
If your Therma-Tru door is binding, leaking light, or letting drafts through, call (254) 736-6486 and ask for a free estimate on Therma-Tru door installation. You’ll get a written price, a named technician before the visit, and a door that closes the way it did the day it was hung. We serve all of Austin and the nearby areas, and live help answers around the clock.
Written by Spencer Odell, Owner, Hale Windows Austin at Hale Windows Austin, serving Austin and nearby areas.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.