New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
VLX 500 Sliding Window in Austin, TX | Hale Windows Austin
The VLX 500 sliding window is a precision-built aluminum system that combines a slim 1.97-inch profile with an unusually smooth glide. If you’re researching this window, you’re likely looking for something that maximizes glass area, operates without effort, and holds up to Austin’s heat, humidity, and occasional severe weather. At Hale Windows Austin, we’re an authorized ViewLux installation partner, which means we sell, install, and stand behind this product with factory-backed warranty coverage. We handle everything from measurement to final cleanup. Call (254) 736-6486 for pricing and availability.
Product Overview – VLX 500 Sliding Window
The VLX 500 is a high-performance aluminum sliding system designed around two ideas: a narrow sightline and a friction-free track. The profile width measures just 1.97 inches, so more of the opening is glass and less is metal frame. That’s a meaningful difference in rooms where you want an unobstructed view of the Hill Country, a greenbelt, or even just the backyard oak tree. The wall thickness comes in at 0.079 inches, which gives the extrusion real structural rigidity without adding visual bulk.
This window is available in two track configurations. The 2-track version is the everyday choice for standard openings: one fixed panel, one sliding panel. The 3-track version gives you three parallel tracks, which is useful when you want multiple panels to stack and open up a wider section of wall. Think of a 9-foot or 12-foot opening leading to a covered patio in Round Rock or a balcony in a downtown Austin condo. The 3-track layout lets two panels slide while a third stays fixed, creating a larger clear opening than a traditional two-panel window can offer.
Buyers choose this series over standard vinyl sliders for a few reasons. Aluminum holds its shape over decades; it doesn’t warp, bow, or sag in Texas heat the way an underbuilt vinyl frame can. The roller hardware is built to handle the weight of large insulated glass units without binding. And the slim frame profile works equally well in mid-century ranch houses in Allandale and in new modern builds in Mueller or East Austin. It’s a builder-grade product with an architectural look.
Hale Windows Austin has installed this exact model in houses across the Austin metro area, and we can walk you through how it performs in real local conditions, not just on paper. For specifics on current lead times and occupied-home installation, call (254) 736-6486.
Technical Specifications
Here are the hard numbers and options for the VLX 500 sliding window, as we install it. If you plan to compare this against another aluminum slider, these are the specs that matter:
- Frame wall thickness: 0.079 inches, engineered for panel weight and long-term rigidity
- Profile width: 1.97 inches, a deliberately narrow extrusion for higher glass-to-frame ratio
- Track configurations: 2-track (one fixed, one sliding panel) or 3-track (two sliding, one fixed, wider opening capacity)
- Glass types: Clear, Frosted, Low-E, Tempered, and Laminated, including combinations like Low-E tempered for code-required areas and Low-E laminated for impact-rated assemblies
- Frame finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood
- Screen options: Sliding screen (basic insect protection) or Retractable screen (rolls into the frame when not in use, disappears from view)
- Performance certification path: NFRC-rated thermal data, AAMA 2400/2410 standard reference for installation practice, AAMA 812 sealant specification on all perimeter joints
These specifications are what the factory ships. What we add on the Austin side is installation work that meets or exceeds the AAMA standards referenced above, plus a final water test before we call the job done.
Performance Features
Thermal Efficiency. The VLX 500 uses a thermal break in the aluminum extrusion, which separates the interior and exterior metal so heat isn’t conducted directly through the frame. Combined with Low-E glass, this window carries NFRC-rated energy performance data that matters in an Austin summer. It won’t perform like a triple-pane European unit, but it outperforms non-thermal aluminum by a wide margin in exterior frame temperature and condensation control.
Acoustic Performance. Aluminum frames with laminated glass do real work against road noise, and Austin has no shortage of that: Interstate 35, Mopac, Loop 360, and the constant drone from ABIA flight paths over southeast Austin. Laminated glass adds a dampening layer between panes that cuts mid-range frequency transmission. We regularly recommend it for bedrooms in neighborhoods like Barton Hills or Crestview where street noise is a nighttime complaint.
Airtightness and Weather Seal. The VLX 500 uses a compression weatherstrip system at the interlock where sliding and fixed panels meet, plus continuous pile seals at the track. When installed level and plumb, the seals seat evenly and prevent the draft and dust problems that plague older aluminum sliders. During installation, we follow AAMA 2400/2410 standards for anchor point placement and shimming to preserve the seal alignment.
Waterproofing. At every installation in Austin, Hale Windows Austin seals the full perimeter with AAMA 812 low-expansion foam sealant before trimming out. This keeps driving rain out of the rough opening even during the violent summer thunderstorms we get in July and August, and it eliminates the air gaps that lead to wall-cavity moisture and mold. The window is designed to drain any water that does enter the track and weep it to the exterior.
Wind Resistance. The 0.079-inch wall thickness and aluminum extrusion give this window a real wind-load advantage. Austin sits on the edge of hail alley and sees straight-line winds well above 60 mph in spring storm events. The frame profile is rated for local climate requirements including wind-load calculations we run at the job site, and for homes in exposed conditions we can spec impact-resistant laminated glass as an added line of defense.
Security and Hardware. Sliding aluminum windows are only as secure as their locks, and the VLX 500 uses a multi-point locking system at the interlock rather than a single thumb latch. The track and roller assembly is mounted with corrosion-resistant components so the window doesn’t develop that mushy, sloppy feel after a few years of operation. Tempered glass is available for code-required locations and any window within 18 inches of the floor.
Color and Glass Options
The VLX 500 ships in six frame finishes, and the choice changes the character of the room more than most people expect. Premium Black is the most popular finish in Austin’s newer builds: it gives a crisp, modern edge that reads as architectural against stucco, brick, or Hardie siding. Pure White works well in traditional and farmhouse-style homes, matching white trim without drawing attention to the frame. Anodized Silver is a raw aluminum finish with a clean industrial look, often specified in modern lofts and commercial-adjacent residential projects. Bronze and Champagne are warmer metallics that pair with natural stone, brown-black window trim, and mid-century exteriors more gracefully than black. Teak Wood is a woodgrain-look finish that gives an aluminum frame the appearance of stained wood without the maintenance, and we see it most often in homes where the interiors lean traditional but the ownership doesn’t want to deal with wood rot in the Austin climate.
On the glass side, Clear glass is the baseline and perfectly functional where heat and glare aren’t a major issue. Low-E is what we recommend for any Austin window that gets direct sun, which is most of them. Frosted glass is used for bathrooms, and for side windows where you want light but not the view of your neighbor’s wall. Tempered glass is a safety requirement near doors and low sills, but it also adds impact resistance. Laminated glass is the big one for storm protection and noise: two panes bonded to an interlayer that holds shards together even if the glass cracks. For an exact line-item price on any combination, call (254) 736-6486.
Installation by Hale Windows Austin in Austin
A sliding window like the VLX 500 only reaches its rated performance when it’s installed squarely, anchored properly, and sealed completely. That’s not marketing language: the manufacturer’s warranty is explicitly conditional on installation workmanship that meets the spec. A window that’s shimmed out of square will bind at the track, leak at the corners, and fail the water test, and no factory warranty covers that.
Our installation process starts with a pre-install inspection of the rough opening. We check the opening dimensions against the window spec, verify that the framing is sound, and identify any rot or water damage in the surround before we order or install. In older Austin homes, particularly in neighborhoods like Hyde Park, Travis Heights, and Clarksville, we often find framing issues that need repair before a new window can seat correctly. We’re upfront about that, and we’ll quote the repair work separately so you know exactly what you’re paying for.
On install day, the window is set level, plumb, and square, anchored to the framing at the manufacturer-specified points, and then sealed around the entire perimeter with AAMA 812 low-expansion foam. That foam is critical in Austin’s climate: it accommodates the thermal movement of an aluminum frame against a wood or concrete opening without cracking, while closing off air and water intrusion at the joint. We work to AAMA 2400/2410 installation standards, which address anchoring, flashing, and sealant detail for window installations. After the window is secured and the interior and exterior trim are complete, we run a water test on the installation and walk you through operation, lock function, and screen removal before we leave. The site is cleaned and the old window is hauled off.
For homes in Lake Travis, Westlake, and other exposed hillside locations, we pay extra attention to wind exposure and flashing detail, because those windows take storm-driven rain from directions that a flat-lot home in Pflugerville never sees. The right flashing and sealant work is the difference between a 20-year window and a callback in five years.
Frequently Asked Questions – VLX 500 Sliding Window
Typical lead time for the VLX 500 in Austin is 3 to 6 weeks from order date, depending on the glass package, finish, and whether you’re ordering a standard or custom size. Custom sizes and laminated glass add the most time. We recommend calling (254) 736-6486 early in the planning process so we can lock in a production slot and coordinate around any other work on your home.
Whether the VLX 500 qualifies for a federal energy tax credit depends on the glass package you select and the current program requirements for your region. Low-E glass with the right U-factor and solar heat gain coefficient typically meets the performance bar for the South-Central zone, but the credit is tied to the rated glass package, not the frame. We’ll provide the NFRC label with your quote so you can verify eligibility with your tax preparer before you buy.
The VLX 500 carries a manufacturer’s warranty through ViewLux covering defects in the aluminum frame, glass seal failure, and hardware. The warranty is conditional on installation by an authorized partner, which is what makes the Hale Windows Austin installation relationship relevant, not incidental. We can walk through the warranty document line by line with you before you sign anything, and we stand behind the workmanship with our own guarantee.
Yes, the VLX 500 is built to order in custom widths and heights within the manufacturer’s structural limits. In Austin we’ve installed this window in small powder-room openings under 2 feet wide as well as multi-panel 3-track walls over 12 feet across. Not every size works in every track configuration, so the best approach is to have us measure the opening and spec the window to the exact rough opening rather than guessing from a tape measure. Call (254) 736-6486 and we’ll send someone out to measure.
Aluminum frames in the VLX 500 need almost nothing beyond a twice-yearly wipe-down with mild soap and water, plus vacuuming out the bottom track to prevent grit from wearing the rollers. Avoid abrasive cleaners and pressure washers on the frame and glass. The finishes are factory-applied and won’t peel, but harsh chemical contact can etch the surface. We’ll leave you with a maintenance card after installation, and we’re always available by phone if you have a question down the road.
Get a Quote – VLX 500 Sliding Window in Austin
The fastest way to get a real number is to call us. We’ll ask about your opening size, glass preference, and finish, and we can usually send over an initial range within a day. Free on-site measurements are available across the Austin metro area. Call (254) 736-6486 to start your project.
Written by the team at Hale Windows Austin, authorized ViewLux installation partner serving Austin, TX and surrounding communities.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Hale Windows Austin Services
What Neighbors Say About Hale Windows Austin
Detailed Images
