New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Repair Across Hornsby Bend
Window repair in Hornsby Bend usually costs between $120 and $680 depending on what’s broken. A window crank replacement runs $140 to $320, while a full sash rebuild on an older manufactured home can push toward $900. We get to Hornsby Bend fast, we quote a written price before any work starts, and we don’t leave until the window opens, closes, and seals the way it should. Call (254) 736-6486 and we’ll schedule a free estimate at your place, whether you’re off FM 969, down in the river bottom, or in one of the newer tracts near Dunlap Road.
Hornsby Bend is unincorporated Travis County, which means a lot of the homes out here were built before anyone cared about standard window sizes. That changes how we repair them. We’re Window Repair specialists who carry parts for non-standard rough openings, and we know which fixes hold up under Central Texas heat and which ones won’t make it through one flood season. More on that below.
Why Hale Windows Austin Is Hornsby Bend’s Preferred Window Repair Company
Since 2009, Hale Windows & Doors has built its name in the Austin area on two things: written prices and a 365-Day Done Right Promise. That promise is simple. If the work isn’t right, we make it right, no argument needed. Every repair carries a written guarantee, and if a repair fails, the second visit is free. We put that in writing before we start. Nobody in Hornsby Bend should have to take a contractor’s word on faith.
We also know that opening your door to a stranger is a real concern, especially on quiet roads where neighbors are spread out. So we built the Threshold Standard. Every technician is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the visit. You’ll know exactly who is pulling up before they knock. Spencer Odell, who leads our team, set that standard in 2009 and it hasn’t slipped since.
We serve Hornsby Bend as part of our wider Austin metro coverage, with crews dispatched from our Austin office. That means the same pricing discipline, the same eight product lines, and the same written-quote policy apply whether we’re working a custom river-bottom house or a 1980s manufactured home off of FM 969.
Window Crank Repair in Hornsby Bend
Window Crank Repair in Hornsby Bend costs between $140 and $320 for most casement windows, and the job usually takes under an hour. Every summer we get calls from homeowners whose crank operators have stripped or sheared from the heat. A crank that won’t close isn’t just annoying in a 100-degree week, it’s an open invitation to insects and every thunderstorm that rolls up the Colorado River valley. Most crank failures don’t require pulling the whole window. We replace the operator, the handle, or the hinge hardware while the sash stays in place.
What We Check Before Replacing the Crank
Before we order a new operator, we open the sash and check the hinge track. In Hornsby Bend’s older manufactured homes, warped vinyl sashes often drag the track and overload the crank. A new crank on a bent sash fails again in months. We’ll tell you if the sash needs straightening or if the track needs cleaning and lubricating before we sell you parts. You’ll get one written quote that covers everything, not a series of add-ons.
Older Casement Windows in Flood-Prone Sections
Down in the river-bottom sections of Hornsby Bend, casement windows near the slab often bind because moisture has swollen the wooden jambs. The crank fails because it’s fighting a frame that moved. We replace the operator and address the binding with minimal disruption, usually without pulling the frame. If the jamb has rotted through, we’ll show you before we cut anything and price the repair in writing.
Window Screen Repair in Hornsby Bend
Window Screen Repair in Hornsby Bend runs $35 to $90 per screen for standard rescreening, and $60 to $150 for custom frames on non-standard openings. Out here, torn screens are more than a nuisance. Armadillos burrowing near foundations kick up gravel that tears lower screens, and kids in the newer subdivisions off Dunlap Road put holes through theirs every summer. We rescreen on-site for standard frames and fabricate custom frames in our shop for the odd-sized windows common in older manufactured homes.
Non-Standard Screen Openings
If your 1980s or 1990s manufactured home has window openings that were never a standard size, a big-box replacement screen won’t fit. We measure the actual opening, cut a custom aluminum frame, and use pet-resistant or solar screen fabric if the window gets direct afternoon sun. That’s the difference in Hornsby Bend’s intense UV: standard fiberglass screen can turn brittle in three years, while solar screen holds up noticeably longer.
When the Screen Frame Is Bent
Storm wind off the Colorado River can bend a screen frame without breaking the glass it’s protecting. If the frame is kinked but not broken, we can often straighten it and rescreen the same day. If it’s twisted beyond use, we’ll build a new one to the same dimensions and swap it in without touching the window itself. Either way, the price is written before we start.
Trusted Brands We Service in Hornsby Bend
We install and service windows from eight professional-grade lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Hornsby Bend homeowners, that matters because PGT impact-rated units hold up to wind-driven debris in a storm, and CWS makes replacement sashes that fit older custom openings without a full-frame tear-out. We keep common hardware and glass packages moving through our shop so a repair on a PGT casement or a CWS sliding window doesn’t sit waiting on parts for two weeks.
Common Window Repair Problems We See in Hornsby Bend Homes
- Fogged double-glazed glass from seal failure. Hornsby Bend’s 100-plus degree heat cycles crack the edge seals on older insulated glass units, especially on west-facing windows. The fog you’re seeing isn’t a frame problem, it’s a failed seal, and the fix is a glass replacement, not a window replacement.
- Rotted wooden jambs in the river bottom. Moisture wicks up from the slab in low-lying sections near the Colorado River, rotting the bottoms of wooden jambs. We replace the rotted section or the entire jamb, then set the sash back square.
- Non-standard rough openings in manufactured homes. Many Hornsby Bend manufactured homes from the 1980s and 1990s have rough openings that are 3/4 inch or more out of square. Off-the-shelf replacement sashes won’t seat properly, so we shim, square, or retrofit as needed.
- Stripped window cranks and broken balances. Heat stress and worn hardware combine to strip casement operators and snap the spring balances in double-hungs. Both are repairable without replacing the whole window, and both should be handled by someone who knows the window type.
High-tension spring balances in double-hung windows carry serious stored energy. We don’t recommend anyone attempt a balance replacement without the right tooling and training. That’s a job for a professional who has done it hundreds of times.
Pricing for Window Repair in Hornsby Bend, TX
Most window repairs in Hornsby Bend fall between $120 and $680 per window. A basic crank operator replacement runs $140 to $320. Rescreening costs $35 to $150 depending on whether the frame is standard or custom. Fogged insulated glass replacement on a standard double-hung runs $180 to $450 per sash, while a full jamb rebuild on a rotted river-bottom window can reach $900 with materials. Four things move the price: whether the opening is standard, whether the sash can be salvaged, whether the window sits in a flood zone requiring flood-resistant glazing or hardware, and what brand we’re repairing. Before any work starts, you’ll have a written line-item quote. If something unexpected shows up once the window is open, we stop, show you, and get your written approval before the price moves. Call (254) 736-6486 to schedule a free estimate.
We Also Serve Cities Near Hornsby Bend
Our crews regularly run from Hornsby Bend into Austin, Round Rock, San Marcos, and Kyle. If you’ve got family in any of those cities who need window work, the same Threshold Standard and the same written pricing apply. We schedule by route so you’re not waiting around all day.
Serving Hornsby Bend, TX - Our Local Coverage Area
We’re based in the Hornsby Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Repair in Hornsby Bend
In most cases, yes, we can replace just the sash. We measure the actual rough opening, not the old sash, and order or fabricate a sash that fits the real dimensions. If the original frame is square and structurally sound, a sash replacement is the cheaper fix. If the frame is rotted, badly out of square, or in a flood zone that requires flood-resistant construction below base flood elevation, you may need a full frame retrofit. We’ll tell you which applies to your home and write the price before anything is ordered. Call (254) 736-6486 for a free measure and quote.
Watch for soft or swelling wood at the bottom of window jambs, sashes that bind or won’t close after a heavy rain, and condensation that never fully dries. These are signs that floodwater or slab moisture is wicking into the frame. We fix it by removing the damaged jamb section or the entire frame, treating the opening, and installing flashed, flood-resistant jamb materials that won’t soak up water the same way. In AE flood zones, any opening below base flood elevation may need flood-resistant glazing and hardware to meet Travis County floodplain rules, and we factor that into the quote upfront rather than surprising you mid-job.
No. Most casement crank repairs are done with the window in place. We remove the operator cover and the old crank mechanism, replace the operator and any worn hinge arms, and test the full throw of the sash. Pulling the whole window only becomes necessary if the frame itself is rotted or so out of square that the sash can’t seal, which is more common in the river-bottom sections of Hornsby Bend than on the higher ground near FM 969.
Yes. We fabricate custom screen frames in our shop to match the actual opening, not a standard size off a shelf. For oversized or irregular openings common in older Hornsby Bend manufactured homes, a custom aluminum frame with your choice of mesh runs $60 to $150 per screen. We can also upgrade to pet-resistant or solar screen if the window takes direct afternoon sun. Same-day rescreening is available for standard frames.
You’ve got several. We can replace failed glazing, rebuild rotted or bent frames, replace worn cranks and balances, and upgrade sashes to insulated glass units in many cases. Single-pane aluminum isn’t efficient, but it’s often repairable for far less than a full replacement. If the frame is structurally sound, we won’t talk you into a tear-out. If you’re thinking about replacement eventually, we’ll tell you which of your windows are worth repairing now and which are wasting enough energy that the math favors replacing. Either way, the choice is yours and the price is in writing.
If you’ve got a window that won’t close, a screen that’s torn, or glass that’s fogged up, call (254) 736-6486. We’ll send a specific technician, by name and photo, with a written quote before any work begins. That’s how we’ve done it since 2009, and that’s how we do it in Hornsby Bend.
Written by Spencer Odell, Owner at Hale Windows Austin, serving Hornsby Bend since 2009.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.