New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Impact Garage Doors: The Austin Owner’s Guide
If your Mr-Glass impact garage door has a failing panel, roller, hinge, or seal in Austin, we stock compatible parts and typically complete the job in one visit. Most Mr-Glass garage door part replacements in Austin run between $180 and $950 installed, depending on whether we’re swapping a roller set or full bottom panel. Homeowners usually discover the problem the same way: a grinding noise when the door opens, a visible crack in a panel after a storm, or a door that suddenly sits crooked in the track.
We’re an independent Austin service provider, not affiliated with Mr-Glass. That matters because we’ll tell you honestly when a quality aftermarket part does the job just as well as OEM, and when it doesn’t. Spencer Odell and our crew have pulled enough Mr-Glass doors apart to know where they fail first in Texas heat and humidity, and what’s worth paying OEM prices for. Call (254) 736-6486 and we’ll match your part and give you a written price before any work starts.
Which Mr-Glass Models This Applies To
Mr-Glass builds impact-rated garage doors in two primary lines we see across Austin: the WindGuard series (standard impact) and the WindGuard Pro series (high-velocity hurricane zone rated, common in exposed hill country homes). Most WindGuard models use a 2-inch thick impact-rated insulated core with an aluminum skin, and the hardware is sized to the door’s weight class, not the model number. The gotcha we run into regularly: a homeowner replaces a roller with a generic 2-inch nylon roller from a big-box store, only to find the Mr-Glass track is machined for a slightly wider steel-bearing roller. It binds within a month.
To identify your part, look for the rating label on the inside edge of the door panel near the bottom. It lists the series, wind load rating, and manufacturing lot. Take a photo of that label before you call us. On the OEM-vs-aftermarket question: for springs, cables, and bottom seals, we use OEM Mr-Glass parts or exact-spec equivalents from the same manufacturers Mr-Glass sources from. For cosmetic items like trim and handle hardware, a quality aftermarket match usually installs fine and saves you 20-30% on the part itself.
Signs Your Mr-Glass Impact Garage Doors Is Failing
- Grinding or squealing during open/close. This is almost always a roller with a shot bearing. Mr-Glass impact doors are heavier than standard doors, so worn rollers put more strain on the opener motor and can burn it out if ignored.
- The door hangs crooked or stops partway. One spring has lost tension or a cable is fraying. On a door this heavy, the remaining spring is now carrying double the load and will fail soon.
- A visible crack or delamination in a panel. Impact doors take hits from hailstones and windborne debris that would dent a standard door. A cracked skin compromises the door’s wind rating, even if it still opens.
- Water staining or daylight at the bottom corners. The bottom seal has compressed or torn. In Austin’s storm season, this lets water into the garage and onto whatever you store there.
- The door feels heavier than it used to. Impact doors have a specific spring balance. When it’s off, the door might still open, but it’s working the opener far harder than it should.
Replacement Cost & What’s Included
Here’s what Mr-Glass repair parts cost installed in Austin right now:
- Roller replacement (full set): $180 to $320, including high-cycle steel-bearing rollers matched to your door’s weight.
- Hinge replacement (single or set): $95 to $240 per hinge, depending on position and gauge.
- Bottom seal replacement: $140 to $260, including the aluminum retainer if it’s corroded.
- Spring or cable replacement (pair): $280 to $520. This is safety-critical work. We always replace springs and cables in pairs on impact doors.
- Panel replacement (single section): $400 to $950, depending on section size and whether it’s a WindGuard or WindGuard Pro core.
Every price is a written line-item quote before we start. No change orders. Every repair carries our written guarantee, and if the repair fails, the second visit is free. That’s part of our 365-Day Done Right Promise.
DIY or Call Us?
Here’s the honest split. You can safely check a few things yourself: inspect the bottom seal for tears, look for loose hinge bolts, and watch the door move for obvious wobble. What you should not touch are the torsion springs and cables. Mr-Glass impact doors are among the heaviest residential doors installed in Austin, and the springs on these doors are under enough tension to cause serious injury if released wrong. We’ve taken calls from homeowners who tried a spring swap with a YouTube video and ended up with a door half-off its track and a bent opener arm. It cost more to fix than the original repair would have.
If it’s a roller, hinge, or seal, a handy owner with the right parts can do it. If it’s a spring, cable, or panel, call (254) 736-6486 and let us handle it. We’ll tell you which it is and what it costs before you commit to anything.
FAQs
Rollers typically last 7-10 years in Austin’s heat and humidity, springs 8-12 years or roughly 10,000 cycles, and bottom seals 3-5 years before UV exposure and storm debris take their toll. If your door is pushing past those marks, budget for replacement before it fails mid-cycle.
No. Because the panel’s impact rating depends on the integrity of the full composite structure, a cracked skin means the panel’s wind rating is compromised. We replace the section, and because Mr-Glass doors are built in sections, you only pay for the damaged one. Call (254) 736-6486 for an exact quote on your panel size.
Most roller, hinge, and seal replacements take 1-2 hours on site. Spring and cable replacement usually runs 2-3 hours. A full panel replacement can take half a day, mostly because the replacement panel has to be matched and test-fit to your existing tracks.
We stock common Mr-Glass rollers, hinges, bottom seals, springs, and cables on our trucks, including parts that fit PGT, CGI, and CWS doors as well. For panel replacements, we take measurements from your door and order the exact section, which usually arrives within 3-5 business days.
If your Mr-Glass impact garage door is making noise, sitting crooked, or showing panel damage, call (254) 736-6486. We’ll identify the part, give you a written price, and tell you exactly who’s coming to your door before we arrive. Spencer Odell signs off on every job, and if it’s not right, we make it right.
Written by Spencer Odell, Owner, Hale Windows Austin at Hale Windows Austin, serving Austin and nearby areas.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.