New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in San Marcos, TX | Hale Windows Austin
We provide independent Mr-Glass window and door service across San Marcos, from downtown ranches to the newer subdivisions east of I-35. What makes our Mr-Glass work different here is simple: we know exactly how this city’s sun, hail, and shifting clay soil break these specific windows. Call (254) 736-6486 for a free estimate, and we’ll tell you straight whether your Mr-Glass units are worth our Window Repair in San Marcos or ready for replacement.
We’re not manufacturer-affiliated or authorized. Spencer Odell, our owner, learned the trade at Los Angeles Trade-Technical College and has spent nearly two decades measuring, framing, and finishing windows across the Southwest. He brought that experience to Texas, and our crew now sees Mr-Glass windows in San Marcos homes every week. That independence matters: we recommend what works for your house and this climate, not what a brand rep tells us to push. For broader Mr-Glass sales & service coverage, we carry the same depth of product knowledge across Central Texas.
Why San Marcos Residents Choose Us for Mr-Glass Service
We’ve pulled failed Mr-Glass sashes out of 1960s pier-and-beam houses off Hopkins Street and tuned up rollers in student duplexes near Texas State. That hands-on range means we recognize a 100 Series spiral balance problem before we even touch the sash. We use factory-equivalent Mr-Glass balance systems, rollers, and weatherstripping for fit and safety, and we source high-grade aftermarket glazing units when original seals are no longer available, especially on pre-1995 frames that predate current tempering standards. Our written price is in your hands before any work starts, every job, every time.
Every technician who comes to your door is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the visit. You’ll know who’s walking up your driveway before they knock. If the work isn’t right, our 365-Day Done Right Promise means we make it right, no argument needed.
Common Mr-Glass Windows & Doors Problems We Solve in San Marcos
- 100 Series single-hungs slamming shut or refusing to stay up. The spiral balances on 1980s units lose tension over time, and San Marcos’s expansive clay makes it worse. When the soil shifts, frames rack, and a balance that was marginal becomes a sash that drops like a guillotine.
- 200 Series double-hungs fogging between the panes. The original non-thermal aluminum frames on these units take decades of Hill Country UV. Seals fail, and after a spring hail storm, you’ll see permanent condensation between the glass that won’t wipe off.
- 300 Series horizontal rollers binding or popping off track. Student apartments and duplexes near Texas State put enormous cycles on these windows. Rollers wear flat, tracks fill with grit and grime, and eventually the sash jumps the rail.
- 400 Series casements with stripped crank gears. Hail-driven wind gusts push hard against casement sashes. The original gear teeth strip, the crank spins free, and the window won’t seal. We’ve also seen bent hinges from windblown debris throw the sash out of alignment.
- Frames racked from foundation movement. San Marcos sits on blackland clay that expands and contracts with moisture. That movement shifts window and door frames, causing sticking, gaps, cracked glass, and air leaks that show up on your energy bill.
Mr-Glass Service in San Marcos: What Local Conditions Mean for Your Equipment
In the hills west of town, homes built before the 1990s often have single-pane Mr-Glass aluminum windows with no thermal breaks. Spencer puts it plainly: a window that almost fits is a window that leaks. On August afternoons, the indoor frame surface on these windows can reach 140°F. Residents tape foil to the glass because touching the frame feels like grabbing a stovetop burner. That’s not a maintenance problem; it’s a design problem baked into the window. The thermal break missing from those older extruded aluminum frames is the single biggest reason west-side San Marcos homeowners call us for Window Replacement - San Marcos with energy-efficient glass upgrades. A dual-pane Low-E insert with a thermal break changes that equation overnight, and it’s the most common Mr-Glass retrofit we do in that part of town. This isn’t a generic window issue; it’s specific to San Marcos’s position on the Balcones Escarpment, where intense western exposure meets pre-1990s housing stock.
Last July, our crew pulled a failed Mr-Glass 200 Series double-hung from a 1970s ranch on Bishop Street near downtown. The homeowner had taped foil over the west-facing window because the aluminum frame was too hot to touch by 3 p.m., and the seal had failed after a spring hail storm. We installed a dual-pane Low-E insert with a thermal break into the original frame, straightened the sill that had dipped from clay-soil movement, and replaced the spiral balances. Now the glass stays clear and the room holds 78°F without extra AC.
Mr-Glass Models & Products We Service in San Marcos
We service the full Mr-Glass residential line: 100 Series Single-Hung, 200 Series Double-Hung, 300 Series Horizontal Roller, and 400 Series Casement. We keep factory-equivalent balance systems, rollers, and weatherstripping in stock for fast San Marcos turnaround, and we’ll source high-grade aftermarket glazing units when original seals aren’t available. Our stance is honest: if the frame is square and the hardware is intact, we repair. If the frame is racked from foundation movement or hail-damaged beyond straightening, we recommend a full-frame replacement with modern energy-efficient glass. We also install and service windows and doors from PGT, CGI, CWS, ES Windows, ECO Window Systems, Therma-Tru, and ViewLux, so the recommendation matches the job, not our inventory.
Mr-Glass Service Pricing in San Marcos
Here’s what San Marcos homeowners can expect for common Mr-Glass work:
- Spiral balance replacement (single-hung): $85 – $165 per window, parts and labor.
- Roller replacement (horizontal roller): $95 – $180 per window depending on track condition.
- Fogged glass insert replacement (dual-pane Low-E): $220 – $450 per sash, depending on size and glass package.
- Casement crank hardware replacement: $110 – $200 per window.
- Full-frame Mr-Glass replacement with energy-efficient glass: $700 – $1,400 per window, installed.
What drives the cost: whether we’re repairing hardware in place or pulling the sash, the size of your opening, and whether your frame is square or needs straightening from clay-soil movement. Every quote is a written line-item price delivered before any work begins. Call (254) 736-6486 for an exact quote; estimates are free, and there’s never a change order sprung on you mid-job.
Serving San Marcos, TX - Our Local Coverage Area
We’re based in the San Marcos area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in San Marcos
The glazing seal has failed. Older Mr-Glass 200 Series units use non-thermal aluminum frames, and decades of UV exposure plus hail impact breaks down the seal. Moisture gets in, and the fog is permanent. We can replace just the glass with a dual-pane Low-E unit, which costs $220 – $450 per sash. Call (254) 736-6486 and we’ll confirm the failure and give you a written quote.
Two forces are usually at work: spiral balances losing tension, and San Marcos’s expansive clay shifting your foundation enough to rack the frame. When the frame twists even a quarter-inch, a marginal balance can’t hold the sash. We diagnose which problem you have and fix it accordingly. Estimates are free.
If the frame is square and the metal isn’t corroded through, yes, we can replace just the glass. We use high-grade aftermarket glazing units when original Mr-Glass seals are no longer available, especially on pre-1995 frames. If the frame is racked or hail-damaged, replacement is the smarter long-term call. We’ll tell you which applies to your windows, not whichever is more profitable for us.
It depends on the frame and the glass. If the frame is square and the hardware is intact, repairing is usually the better value. But if you’re still running single-pane glass with no thermal break, an energy-efficient insert upgrade will pay for itself in Texas cooling costs. We’ll give you both options with written pricing and let you decide.
Flat rollers and gritty tracks. The 300 Series horizontal rollers in student housing near Texas State take heavy daily use, and when the roller wheels wear flat or the track fills with debris, the sash can ride up and off the rail. We replace the rollers, clean and realign the track, and the window slides like it should. Call (254) 736-6486 for a free estimate.
Service Areas Near San Marcos
We serve all of San Marcos service area plus the surrounding Central Texas communities. If you’re just up the road in Kyle or Manor, we cover those too. We also handle Mr-Glass service in Austin and Mr-Glass service in Round Rock for the same written-price, no-change-order promise. Wherever you are in the corridor, the same crew, same standards, same 365-Day Done Right Promise.
Book Your Mr-Glass Service in San Marcos Today
We’ll send a background-checked, photo-badged technician to your San Marcos home, put the price in writing before any work starts, and back the job with our 365-Day Done Right Promise. Call (254) 736-6486 to schedule your free estimate.
Written by Spencer Odell, Owner at Hale Windows Austin, serving San Marcos since 2009.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.