New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Impact Garage Doors: The Austin Owner’s Guide
We stock, match, and install Therma-Tru-compatible impact garage doors throughout Austin, with most complete door replacements running $3,800 to $9,400 installed depending on size, series, and reinforcement requirements. If your door took a hit during storm season or the springs have finally given out after years of Texas heat cycling, we can usually get the right replacement ordered and scheduled within a week. Most Austin homeowners find us the same way: the door makes a sound it shouldn’t, the panel’s got a crack running through it, or the opener is straining against a door that no longer sits square in its tracks.
Which Therma-Tru Models This Applies To
Therma-Tru impact garage doors are less common than their entry door lines, and that’s exactly why matching the right part matters. The compatibility gotcha most people miss: Therma-Tru garage door panels are engineered to pair with specific track gauges and spring torque ratings. You cannot drop a panel from one series onto a track system meant for another and expect it to survive an Austin windstorm. The door’s identifying label is usually on the inside face of the top panel, near the hinge line. That label gives you the series number, panel thickness, and date of manufacture. If the label’s gone or illegible, we measure the panel thickness and the track profile to identify what you have before quoting anything.
On the OEM-versus-aftermarket question: for springs, rollers, and cables, we carry quality aftermarket equivalents that meet or exceed Therma-Tru’s original specs, and they typically cost less without shortening the lifespan. For impact-rated panels, we order genuine Therma-Tru-compatible panels because that impact certification is tied to the panel’s core construction. A generic steel panel doesn’t carry the same rating, and in Austin where code calls for windborne-debris protection in certain zones, the rating is the whole ballgame.
Signs Your Therma-Tru Impact Garage Door Is Failing
- The door shudders or jerks on the way up. This usually means a roller is flattening or a hinge is wearing unevenly. Left alone, the uneven load transfers to the spring, and a spring failure is louder and more expensive.
- Visible rust at the bottom panel corners. Austin’s humidity does this, especially on doors facing east where morning moisture lingers. Rust there spreads into the panel core, and once the core absorbs water, the impact rating is compromised.
- The door sits crooked in the opening when closed. That’s a sign of a failing cable or an uneven spring. The door is now loading one side of the track heavily, which wears bearings and brackets faster.
- You hear a metallic grind when the door moves. That’s usually a seized roller grinding against the track rather than spinning. It’s metal-on-metal wear, and it’ll gouge the track if ignored.
- The door feels heavy when you disengage the opener and lift it manually. Springs lose tension as they age. In an impact-rated system, spring tension is also part of what keeps the door sealed against wind pressure. A door that feels heavy is under-sprung and working the opener to death.
Replacement Cost & What’s Included
In Austin, a complete Therma-Tru-compatible impact garage door replacement typically lands between $3,800 and $9,400 installed. The spread comes down to three things: door size (a two-car door runs more than a single), whether you need a standard panel or a wind-rated impact panel, and whether the existing tracks and springs can be reused or need to go too. Most of the time, replacing everything at once is the smarter spend, because pairing new panels with old springs just moves the failure date down the road.
| Job | Typical Austin Installed Range |
|---|---|
| Single-car impact door, standard track | $3,800 – $5,200 |
| Two-car impact door, standard track | $5,500 – $7,400 |
| Two-car impact door, wind-rated panels + new track/springs | $7,200 – $9,400 |
| Spring or cable replacement only | $280 – $640 |
Every quote from Hale Windows Austin is a written line-item price before any work begins. The number on the page is the number on the invoice. Our workmanship on Therma-Tru-compatible doors carries our written repair guarantee, and if something we installed fails, the second visit is free.
DIY or Call Us?
Some things on a garage door are safe for an Austin homeowner to check: whether the safety sensors are aligned, whether the opener shows an error code, whether there’s debris in the track. Those are fine. What is not fine is touching the torsion springs or the lift cables yourself. Those springs hold hundreds of pounds of tension, and when they let go, they can take a hand, an eye, or worse with them. We don’t say that to scare you. We say it because every year someone in Texas lands in an ER trying to save a few hundred dollars on a spring.
If your Therma-Tru impact door needs anything beyond a sensor adjustment, call us at (254) 736-6486. Spencer Odell and our crew will tell you plainly whether it’s a repair or a replacement, what it costs in writing, and who’s coming to your door before we send anyone out.
FAQs
Plan on 12 to 18 years for the door itself in Austin’s climate, with springs needing replacement every 7 to 10 years depending on how many open-close cycles the door sees daily. Heat and humidity are the main age-accelerators here, and east-facing doors in particular take more weather than west-facing ones. Call (254) 736-6486 if you want us to assess what you have.
Cosmetic dents can sometimes be straightened, but if the panel’s steel skin is cracked or punctured, the impact rating is gone and the panel must be replaced. Once the core is exposed to Austin’s humidity, the panel absorbs moisture and the failure accelerates. We’ll tell you honestly which situation you have, and estimates are free.
Most single-door replacements in Austin take one day, start to finish, including removing the old door, installing the new panels, tracks, springs, and testing the opener. Wind-rated panel orders may add a few days of lead time. We’ll give you a firm date when you schedule, not a window.
We stock common replacement springs, rollers, cables, and hinges for Therma-Tru-compatible doors on our truck, along with parts for PGT, CGI, and CWS door systems. Specialty impact panels are typically ordered per door to match the series and size exactly. Call (254) 736-6486 and we’ll tell you whether what you need is on the truck or needs an order.
If your Therma-Tru impact garage door is failing in Austin, call Hale Windows Austin at (254) 736-6486 for a free estimate. We’ll quote a written price, tell you exactly who’s coming, and back the work with our 365-Day Done Right Promise. Spencer grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College, and he’ll tell you the same thing he tells everyone in Tarrytown: a window that almost fits is a window that leaks. The same discipline applies to every door we hang.
Written by Spencer Odell, Owner, Hale Windows Austin at Hale Windows Austin, serving Austin and nearby areas.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.