New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Casement Windows in Austin, TX
Casement windows are hinged at the side and crank outward, giving you a full, unobstructed opening and a tight seal when closed. In Austin, where summer heat pushes past 100 degrees and spring storms roll in fast, they’re one of the strongest performers for both energy efficiency and weather resistance. If you’re replacing windows in an older Austin home or building new in neighborhoods like Mueller, Allandale, or Circle C, casement windows deserve a serious look.
At Hale Windows Austin, we install and service casement windows from professional-grade lines including PGT, CGI, and ES Windows, and we put a written price in your hands before any work begins. Call (254) 736-6486 for a free estimate, or keep reading to see whether casements are the right fit for your home. This guide sits within our broader Window Installation work across Austin.
Key Takeaways
- Casement windows crank open fully, catching Austin’s prevailing southeast breezes better than double-hung windows.
- Expect to pay $700 – $2,200 per window installed in the Austin market, depending on size, glass package, and frame material.
- Hale’s 365-Day Done Right Promise covers every casement install: if it’s not right, we make it right.
- Every Hale technician arrives background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit.
What Is a Casement Window?
A casement window is a window attached to its frame by one or more side hinges. You open it by turning a crank handle, which swings the sash outward like a small door. This design has been around for centuries, but modern casements in Austin homes typically use multi-point locking systems and compression seals that create a far tighter closure than sliding or double-hung windows.
The difference matters in Central Texas. When a casement window closes, the sash presses firmly against the weatherstripping on all four sides. Wind pressing against the window actually pushes it tighter. In a place where north winds can gust through in winter and thunderstorms hammer windows in May, that seal is doing real work. Most Austin homeowners who switch to casements from older aluminum sliders tell us the first thing they notice is how much quieter the room gets.
Casements also open wider than any other operable window type. The full sash swings out, so the entire window opening becomes a passage for air. That’s a tangible benefit in spring and fall, when Austin temperatures dip into the 70s and you can turn off the AC and let the house breathe.
We install casement windows from PGT, CGI, and ES Windows lines, among others in our eight-brand catalog. Different homes call for different products. A south-facing wall in Barton Hills takes more direct sun than a shaded lot in Hyde Park, and that changes the glass package we recommend. We’d rather match the product to the house than push one brand on every job.
When You Need Casement Windows
Casements aren’t the right window for every opening, but there are clear signals that they’re worth considering. Here’s what we look for when we walk an Austin home:
- You have older crank-out windows that are failing. Homes built in the 1980s and 1990s around Northwest Hills and Round Rock often have original casements with worn-out operator mechanisms. If the crank spins without moving the sash, or the window won’t stay open, replacement is usually cheaper than repeated repairs.
- Your energy bills spike in July and August. Single-pane aluminum windows lose heat fast. Casement windows with low-E glass (a thin coating that blocks heat while letting light through) can cut heat gain significantly on east- and west-facing walls in Austin.
- You want better airflow in a specific room. Kitchens, bathrooms, and stairwells often have small or high windows that are hard to reach. Casements work well above countertops and in tight spots because the crank does the work for you. In Austin’s older bungalow neighborhoods like Travis Heights, we install casements in kitchens to catch cross-breezes that double-hung windows miss.
- You’re building an addition or doing a full remodel. Austin’s permitting process for additions usually requires windows to meet current energy code. Casements are often the most cost-effective way to hit the numbers, especially when you’re already working with an architect or builder.
- Your current windows leak during storms. Austin’s spring and fall rain can be intense. If you’re mopping up water after every thunderstorm, the compression seal on a casement window is one of the best defenses against wind-driven rain.
- You need windows that lock down tight. Casements with multi-point locks engage at multiple points along the frame, not just one latch in the center. For homeowners who care about security – especially on ground-floor windows facing the street or alley – that’s a meaningful difference.
If you’re seeing any of these conditions, the next step is an in-home assessment. We measure, inspect the existing framing, and give you a written price before any work is approved. Call (254) 736-6486 to schedule.
Why Austin Homeowners Choose Casement Windows
The climate here is specific, and window choice follows from it. Austin averages around 300 sunny days a year, with summer highs that regularly break 100 degrees and winter cold snaps that dip into the 20s. Humidity swings from single digits in a dry August to near saturation during spring rains. Your windows are the front line for all of it.
Casement windows hold up to Austin’s conditions in three specific ways:
1. The seal is tighter than any sliding window. When a casement closes, compression pulls the sash against weatherstripping on all four sides. There are no sliding tracks to leak air. In a city where summer cooling costs run high, that tighter seal translates directly to lower AC bills.
2. The opening catches breeze directionally. Austin’s prevailing winds come from the southeast for most of the year. Casement windows can angle the open sash to direct those breezes into the room, which passive sliders and double-hungs can’t do. We’ve had clients in Zilker and Crestview tell us their living rooms feel five degrees cooler with casements open on opposite walls, simply because of the airflow pattern.
3. Multi-point locks engage the frame at several points. That’s a security upgrade on ground floors and casitas, without adding bars or grilles. For many Austin homeowners – especially those who are home alone during the day or who have young children – that extra locking strength matters as much as the energy savings.
We also see casements chosen for accessibility. The crank mechanism is easier to operate than lifting a heavy double-hung sash, which makes casements a common choice for older Austin homeowners in neighborhoods like Allandale and Rosedale who plan to stay in their homes long term.
Our Casement Windows Process
Here’s how a casement window replacement or installation goes with Hale Windows Austin, step by step:
- You call or book an appointment. A live person answers, 24 hours a day, 7 days a week. No voicemail, no callback queue. During that first conversation, we’ll ask about the window location, the problem you’re solving, and your timeline.
- We send you a technician’s name and photo before the visit. This is our Threshold Standard, and it’s non-negotiable: every technician is background-checked, identity-verified, uniformed, and photo-badged. Before anyone pulls up to your house, you know exactly who’s coming and what they look like. When the knock comes, you’re not guessing.
- We measure, inspect, and test. At your home, we check the existing openings, look at the framing around the window, and discuss your priorities: energy efficiency, security, airflow, or all of the above. We’ll bring product samples from the brands that fit your situation, whether that’s PGT for impact-rated needs, CGI in a coastal-grade application, or ES Windows for high-end architectural builds.
- You get a written price before any work starts. No verbal estimates, no “we’ll see how it goes.” The price is on paper, itemized, and in your hands before you decide anything. If you approve the quote, we order your windows and schedule the install.
- We install, seal, and clean up. The old window comes out, the opening gets inspected and prepped, the new casement goes in, gets insulated, sealed, and trimmed. We test the crank, locks, and seal before we leave. We walk you through the operation and maintenance so you know exactly how the window works.
- Your 365-Day Done Right Promise begins on day one. If anything isn’t right in the first year – the crank feels stiff, the seal isn’t performing, you notice a draft – call us. We make it right, no argument needed.
How Much Do Casement Windows Cost in Austin?
Casement window installation in Austin typically runs $700 to $2,200 per window, fully installed. The range is wide because window size, frame material, glass package, and the condition of the existing opening all move the number. Here’s how it breaks down:
| Cost Factor | Typical Range in Austin | Notes |
|---|---|---|
| Standard vinyl casement (24″ x 36″), basic glass | $700 – $950 installed | Most common entry-level option; good energy performance for the price. |
| Vinyl casement with low-E glass | $850 – $1,200 installed | Low-E is a thin coating that blocks heat while letting light through; recommended for south- and west-facing windows. |
| Wood or wood-clad casement | $1,100 – $2,200 installed | Higher-end look; common in historic Austin neighborhoods where wood windows match the home’s original style. |
| Impact-rated casement (PGT or CGI) | $1,200 – $2,000 installed | Engineered for storm and impact resistance; adds security value regardless of weather. |
| Custom sizes or specialty shapes | Add 20% – 40% over standard | Arched tops, oversized openings, and non-standard dimensions all increase fabrication cost. |
Several things move your price in the Austin market specifically. The age of your home matters: older houses in Travis Heights, Hyde Park, and Clarksville often have non-standard rough openings, which means we order custom-sized units rather than stock sizes. Access matters too: a second-story window on a steep-slope lot in West Lake Hills requires more equipment and safety setup than a ground-floor window in a flat Austin neighborhood. And the condition of the existing framing around the window affects how much prep work is needed before the new casement goes in.
Every quote from Hale Windows Austin is itemized in writing before you approve anything. The price we quote is the price you pay. No surprise fees, no “we discovered extra work” add-ons halfway through the job. If we find something unexpected during the install, we stop, show you what we found, and get your approval before any additional cost is added.
Call (254) 736-6486 for a free in-home estimate. We’ll measure, inspect, and give you a written price for casement windows on your specific openings.
Casement Windows vs. Other Window Types
Casement windows aren’t always the best choice, and a good window company should tell you when they’re not. Here’s how they stack up against the alternatives in Austin conditions:
Casement vs. Double-Hung
Double-hung windows slide vertically and are the most common window type in American homes, including much of Austin’s housing stock. They’re familiar and work well in tall, narrow openings. But they seal less tightly than casements because the sashes ride in tracks with small air gaps. Casements win on energy efficiency and airflow control. Double-hungs win when you want a traditional look or when the window opening is too tall for a casement’s side-hinge geometry.
Casement vs. Sliding Windows
Sliders are the cheapest operable window and common in mid-century Austin homes. They open horizontally on a track. Their weakness is the track itself: it collects dust, debris, and in Austin’s pollen season, a thick film of pollen that makes operation gritty. Casements seal tighter and offer mechanical advantage through the crank, which means easier operation over the long haul.
Casement vs. Awning Windows
Awning windows are hinged at the top and open outward from the bottom. They’re structurally very similar to casements but open vertically rather than horizontally. Awning windows are a good choice for rain-prone climates because the glass angle sheds water even when the window is open. Casements are better for catching side breezes. In Austin, where most homes want maximum airflow in the shoulder seasons, casements tend to get the nod, but we do install awnings in bathrooms and high transom locations where direct rain protection matters.
Casement vs. Picture Windows
Picture windows don’t open at all. They’re for views and light. If you have a large scenic opening – say, looking out over the Hill Country on a West Lake Hills lot – a picture window is often the right call for the center of the wall, with casements on either side for ventilation. That combination is one of the most common layouts we install in new builds and remodels.
Casement Window Replacement in Austin’s Older Homes
Many of Austin’s older neighborhoods – Travis Heights, Hyde Park, Bouldin Creek, Rosedale, North Loop – were built between the 1910s and 1960s. Some of these homes have original wood casement windows or early aluminum replacements. Working on these openings requires care that not every installer brings.
Old opening sizes are rarely square. Decades of foundation settling, framing shifts, and previous retrofits mean the rough opening is often a quarter-inch or more out of square. A fast installer will shim the window, caulk the gaps, and move on. We take a different approach: we inspect the framing behind the old window before we order anything, measure in multiple places, and order the new casement to fit the actual opening, not the assumed one.
There’s also the question of materials. Some historic district rules in Austin, including parts of Hyde Park and Old West Austin, affect what window materials and styles are allowed on street-facing elevations. If you’re in a historic district and considering a casement window replacement, we’ll help you understand what’s permitted before you commit to a product. Wood-clad casements often satisfy the visual requirements while giving you modern glass and seals.
We’ve replaced casements in homes across Austin’s older neighborhoods, and the pattern is consistent: the old windows were good for their era, but the glass, seals, and hardware are tired. New casements with modern low-E glass and compression seals make an immediate difference in comfort and noise, and they preserve the look of the original home when matched properly.
Energy Performance in Austin’s Climate
Window energy performance is measured in two numbers that matter for Austin homeowners: U-factor, which measures how well a window resists heat flow, and Solar Heat Gain Coefficient (SHGC), which measures how well it blocks solar heat. In a cooling-dominated climate like Austin’s, SHGC matters most.
Casement windows consistently post strong SHGC numbers because of their tight compression seal and the ability to pair them with specialized low-E glass. The low-E coating – a thin metallic layer applied to the glass surface – blocks a significant portion of infrared heat while letting visible light pass. You get the light without the heat, which is exactly the trade-off Austin homeowners need from March through October.
The orientation of the window matters too. South- and west-facing windows in Austin take the biggest solar load. We typically recommend a lower SHGC glass package on those exposures, and we can vary the package window by window within the same home. A shaded north-facing casement can use a higher SHGC glass to let in more passive heat in winter, while a west-facing casement gets a tighter solar-block coating. That’s the kind of matching that only a specialist installer does consistently.
The brands we work with – including PGT and ES Windows – offer a range of glass packages that meet both the Austin energy code and the higher comfort bar most homeowners want. We’ll walk through the specific numbers during your estimate.
Security and the Threshold Standard
Opening the door to a window company is a real decision, not a casual one. That’s why we built the Threshold Standard, and it applies to every visit we make in Austin, from a single window replacement to a whole-home install.
The Threshold Standard means five specific things, every time:
- Background check: every technician passes a criminal background check before they ever put on a Hale uniform.
- Identity verification: we verify government-issued ID for every technician as part of hiring.
- Photo badge: every technician wears a visible photo badge with their name on it.
- Uniform: our technicians arrive in identifiable Hale Windows Austin attire, not a generic truck and plain clothes.
- Pre-announced visit: before the appointment, we send you the technician’s name and photo by text or email. You know who’s coming before they arrive, and you can verify identity at the door without a moment of doubt.
We built this standard because we work in people’s homes, often when they’re alone or when young children are present. Knowing who’s at the door isn’t a luxury; it’s baseline professionalism. Our technicians live and work in the Austin area, and their reputations ride on every visit.
Why Hale Windows Austin for Casement Windows
Hale Windows Austin was founded in 2009 and operates as an independently owned and operated location within the Threshold Group family of home-service brands. We’re not a franchise, not a chain, and not a corporate national brand. We’re a windows-and-doors specialist serving Austin homeowners directly.
Three commitments define how we work:
The 365-Day Done Right Promise. If your casement window installation is not right within the first year, we make it right. No argument, no fine print, no “that’s normal wear and tear.” It’s a documented, named guarantee stamped on every job. If a repair we make fails, a second visit is free.
Written price before work begins. The number we show you before you approve the job is the number you pay. Every time, on every job, no exceptions. We put it on paper because that’s the only way a promise about money means anything.
The Threshold Standard on every visit. Background-checked, identity-verified, photo-badged, pre-announced technicians. You know exactly who’s coming to your home before they arrive.
We also carry real product depth rather than pushing a single brand. We install and service casement windows from eight professional lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That gives us room to match the window to your home rather than forcing your home to fit one window. For casement work specifically, we most often recommend PGT and ES Windows for standard residential applications, and CGI when impact-rated products make sense.
The Importance of Proper Casement Window Installation
Even the best casement window performs poorly if it’s installed wrong. Casements are heavy – the sash hangs on side hinges, so all the weight bears on one side of the frame. That requires precise shimming, secure anchoring, and proper flashing to keep water out.
Here’s what we do that separates a good casement install from a failing one:
- We check the rough opening with a level before ordering. If the opening is out of square, we know in advance and plan for it rather than discovering it mid-install.
- We anchor through the frame into the framing, not just the sheathing. Casement windows carry load on the hinge side. Anchoring into solid framing prevents sag and crank binding over the years.
- We flash the rough opening properly. Austin’s rain comes in bursts, often with wind behind it. If the flashing fails, water gets behind the siding and into the wall, and by the time you see the damage, it’s expensive. We flash above, below, and around the window, integrating with the existing weather barrier.
- We seal the interior and exterior with materials rated for Texas temperature swings. Austin’s temperature range swings from freezing to triple digits, and sealants that work in milder climates can crack here. We use materials designed for this climate.
- We test every crank and lock multiple times before we consider the job done. If the operation isn’t smooth on install day, it won’t get smoother over time. We adjust until it’s right.
This is also why we urge homeowners to avoid the DIY route on casement replacement. Removing an old window without damaging the framing takes experience. Installing a casement level, square, and sealed is real work with real consequences if it’s done wrong. If you’re considering doing it yourself to save money, we’d rather see you get an honest written price from us and make the call with full information.
FAQs – Casement Windows
How much do casement windows cost in Austin?
Casement window installation in Austin typically runs $700 to $2,200 per window, fully installed. The main variables are window size, frame material (vinyl, wood, or wood-clad), glass package, and the condition of the existing opening. Custom sizes and impact-rated products from PGT or CGI land at the upper end. Every Hale quote is itemized in writing before work starts, so you’ll know your exact number upfront. Call (254) 736-6486 for a free estimate.
Are casement windows more energy efficient than double-hung windows?
Yes, casement windows are generally more energy efficient than double-hung windows in Austin’s climate. The compression seal on a casement closes tighter than the sliding tracks on a double-hung, which means less air leakage and better performance in summer heat. When paired with low-E glass tuned for Austin’s sun exposure, casements post consistently strong energy numbers. The trade-off is the look: if you want a traditional vertical-sliding style, double-hungs are still a valid choice.
Can you replace just one casement window, or do I need to do the whole room?
You can replace a single casement window. There’s no technical reason you need to replace all windows in a room at once. However, if the surrounding windows are the same age and product, there’s a practical argument for doing them together: matching the glass package and finish is easier, and the labor efficiency of one visit can lower the per-window cost. We’ll give you pricing for the single window and for the full set so you can decide with real numbers, not pressure.
Can Hale install casement windows the same week I call?
In many cases, yes. Standard-size casement windows from our stocked lines can often be installed within a week of your written approval. Custom sizes, which are common in Austin’s older homes with non-standard rough openings, typically take longer because the units are fabricated to order. When we give you the written price, we’ll also give you a realistic install date. Call (254) 736-6486 to check current availability for your openings.
What happens if my casement window has a problem after installation?
Every casement installation from Hale Windows Austin is covered by the 365-Day Done Right Promise. If the window is not right within the first year – the crank binds, the seal leaks, you notice a draft – call us and we make it right, no argument needed. If a repair we performed fails, a second visit is free. The promise is documented on your paperwork, not just verbal.
Is it cheaper to repair an old casement window or replace it?
For most Austin homes with original casements from the 1980s or 1990s, replacement is cheaper over a three-to-five-year horizon than repeated repairs. The common failure points – crank operators, hinges, and failed seals on dual-pane glass – each cost between $150 and $500 to repair individually, and old windows tend to fail in sequence. A new casement at $700 to $1,200 from a professional-grade line gives you modern glass, a tight seal, and a clean starting point under warranty. Call (254) 736-6486 for an honest assessment of repair versus replacement on your specific windows.
Get a Free Casement Window Estimate in Austin
If you’re considering casement windows in Austin, get a written price before you decide anything. We’ll measure your openings, walk through the glass and brand options that fit your home, and put the full number on paper. No pressure, no surprise fees, and no obligation.
We serve all of Austin and the surrounding area, including Mueller, Hyde Park, Travis Heights, Allandale, Rosedale, Circle C, Zilker, Barton Hills, Crestview, Bouldin Creek, North Loop, Northwest Hills, and West Lake Hills. Our home page has more about the full range of Window Installation services we provide.
Call (254) 736-6486 now. A live person answers, 24 hours a day, 7 days a week. We’ll get you scheduled and on the way to a written estimate.
Written by Spencer Odell, Owner at Hale Windows Austin, serving Austin.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.