New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Front Door Replacement Across Austin
Front door replacement in Austin typically runs $1,900 to $5,800 installed, and most jobs are completed in one day once the slab is on hand. That’s the number to anchor on. Hale Windows Austin has been installing entry doors across Austin neighborhoods from Mueller to Northwest Hills since 2009, and we put a written price in your hands before anyone picks up a tool. If your front door sticks, leaks air, or no longer locks square, call (254) 736-6486 for a free estimate. We’ll tell you exactly who is coming to your home before the truck rolls.
Why Hale Windows Austin Is Austin’s Preferred Front Door Replacement Company
Our crews know the difference between a 1920s Hyde Park bungalow with a settling pier-and-beam foundation and a 1990s Lantana Hills build with a builder-grade steel slab. That matters in Austin, because the job is rarely a simple slab swap. Homes here sit on swelling clay soil, and doors installed decades ago have often shifted with the frame. We measure for that.
Every front door replacement includes the Threshold Standard. That means the technician sent to your Austin home is background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit. You know who is at the door before you open it. Our 365-Day Done Right Promise backs the work: if it is not right, we make it right, no argument needed.
We’re part of the Threshold Group family of home-service brands, founded in 2009. Our Austin office coordinates scheduling and dispatch locally; crews serve Austin and the surrounding area directly, so you’re not working through a call center in another state.
Entry Door Installation in Austin
Entry Door Installation in Austin means a new door where one didn’t exist before, or a full rough-opening job that goes beyond swapping the slab. We see this often on detached shops, backyard ADUs, and enclosed porches in areas like Travis County ETJ, where homeowners are building out acreage and need a proper entry that meets code.
Installation starts with the rough opening. We verify the header, the king and jack studs, and the condition of the subfloor at the threshold. On Austin’s clay soil, a slab that has shifted even half an inch changes how the door hangs. We account for that before the first shim goes in.
Typical Entry Door Installation cost in Austin runs $2,400 to $6,200, depending on whether we’re cutting a new opening or finishing an existing one. That includes flashing, threshold, trim, and a written guarantee. Permits add cost when the job is structural, which we’ll cover in the quote.
New Openings and Structural Work
Cutting a new entry into a load-bearing wall is a structural job. We pull county permits when the home sits in Travis County ETJ or other unincorporated areas, and we coordinate inspections. The price covers engineering review when needed, and we scope it before we quote, not after.
Shop, ADU, and Outbuilding Entries
Detached structures on acreage around Austin often need a door that can handle direct sun exposure and occasional freeze cycles. We install fiberglass and steel options that hold their shape through Central Texas weather swings, and we match the look to the main house so the property doesn’t gain a mismatched afterthought.
Entry Door Replacement in Austin
Entry Door Replacement in Austin means removing the existing slab – or slab and frame – and installing a new door in the same opening. This is the most common job we do in Austin, particularly on 1960s through 1980s homes where the original wood or aluminum entry door has warped, rotted, or stopped sealing.
Austin’s humidity does real damage to door frames. On older ranch homes with original wood jambs, we routinely find rot where the threshold meets the jamb legs. Sun exposure on west-facing entries warps cheap vinyl and aluminum slabs, causing binding, air leaks, and a deadbolt that won’t throw without lifting the handle. A new Therma-Tru fiberglass slab solves the warping; a rebuilt jamb solves the rot.
Entry Door Replacement in Austin typically costs $1,900 to $5,800 installed. The range accounts for slab-only replacement on the low end and full frame-out with new trim, threshold, and flashing on the high end. Austin Stone veneer homes often add $300 to $900 for custom flashing work. We’ll show you the exact number before you sign anything.
Slab-Only Replacement
When the existing frame is square, level, and rot-free, we can replace just the slab. This keeps costs down and usually finishes in a few hours. We still replace the weatherstripping and threshold gasket, because those are the parts that actually seal your conditioned air inside.
Full Frame-Out Replacement
If the jamb has rot, if the rough opening has shifted, or if you’re upgrading to a pre-hung unit with a new sill pan, we pull the entire frame. This is a longer job, but it is the only way to get a true air seal on an Austin home that has settled over decades.
Trusted Brands We Service in Austin
We install and service entry doors from four professional-grade manufacturers: Therma-Tru, ViewLux, PGT, and CGI. That is not an accident. Therma-Tru fiberglass doors resist the warping and rot that Austin humidity and sun cause so consistently. ViewLux gives us a high-end steel option with architectural glass packages. PGT and CGI matter when homeowners ask about impact-rated glass, which we’ll get into below. Because we stock local parts in Austin for these lines, turnaround on replacement slabs and hardware is faster than ordering blind. And we match the product to the job, not the other way around.
Common Front Door Replacement Problems We See in Austin Homes
- Rotted jambs and thresholds from humidity. Austin’s subtropical humidity soaks into wood door frames on older ranch homes, especially where sprinkler overspray hits the entry. By the time the door sags, the bottom six inches of the jamb is often gone. We replace the jamb, not just the slab.
- Warped aluminum and vinyl slabs on west-facing entries. The late afternoon sun in Austin is unforgiving. Cheap aluminum doors bake, expand, and warp until the deadbolt grinds and the air leaks. A fiberglass slab holds its shape through a hundred August afternoons.
- Freeze-thaw damage after winter events. The 2021 winter storm cracked weatherstripping and door glass across Austin. Once the seal breaks, drafts and moisture follow. We replace the gaskets and the glass unit, and if the slab itself cracked, we replace the door.
- Austin Stone veneer flashing failures. On 1960s-80s homes with Austin Stone limestone, poor flashing around the entry lets water behind the veneer. We rebuild the flashing so water gets directed away from the rough opening – a detail that gets skipped on generic installs more often than it should.
Pricing for Front Door Replacement in Austin, TX
Here is what we actually quote in Austin. A slab-only replacement on a standard 36-inch entry runs $1,900 to $3,200. A full frame-out with new jamb, threshold, trim, and flashing runs $3,500 to $5,800. Austin Stone veneer homes add $300 to $900 because we custom-bend coil stock to follow the irregular limestone profile rather than slapping a straight flashing bar over it. Impact-rated glass packages from PGT or CGI start around $600 over base pricing. County permits in Travis County ETJ add $150 to $400, and we pull them for you. The written price we give you before work starts is the number you pay. Call (254) 736-6486 for an exact quote on your Austin home – the estimate is free.
We Also Serve Cities Near Austin
Hale Windows Austin works across the metro, including Manor, Round Rock, Buda, and Hutto. If you’re just outside Austin proper on acreage in Travis County ETJ, we handle county permitting and access planning for longer driveways, gated entries, and equipment staging. Read more about our Front Door Replacement services or see how we serve Front Door Replacement in Austin and nearby communities.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Front Door Replacement in Austin
Yes. We pull the permit when the job is structural, which is common on acreage outside Austin city limits. County permits run $150 to $400 for most entry door replacements, and we coordinate the inspection. The permit cost is listed in your written quote before work starts, not added later.
It adds flashing work. Austin Stone limestone is irregular, so the flashing that ties the door frame to the wall has to be custom-bent to follow the stone profile rather than pinned flat. We also cut the stone back to allow the new frame to sit plumb. On these homes we budget an extra $300 to $900 and an extra two to three hours of labor. Call (254) 736-6486 for a quote on your specific entry.
Yes. Austin’s cooling season runs from April through October, and an old door with a failed seal, warped slab, or rotted weatherstripping leaks conditioned air around the clock. A new fiberglass door with an insulated core and fresh gaskets stops that. We replaced a warped single-pane aluminum door on a 1978 Austin Stone ranch on Spicewood Springs Road in Northwest Hills. The original jamb had rotted from decades of humidity and the slab was no longer square, so we trimmed the opening and installed a Therma-Tru fiberglass entry with a high-SHGC Low-E insulated glass unit. The owner immediately noticed the sun no longer baked the entryway. Most homeowners see the difference in the first hot month.
We install impact-rated glass packages from PGT and CGI in Austin entry doors. Worth it depends on your exposure. Most Austin homes don’t need hurricane-rated glazing, but the same laminated glass that stops wind-blown debris also stops forced-entry attempts and cuts UV damage to your flooring. If your front door gets full afternoon sun and the entry faces the street, an impact-rated glazing package runs about $600 to $1,100 over base pricing. Call (254) 736-6486 and we’ll quote it both ways.
One to two days for a standard opening, and up to three if we’re cutting a new opening or rebuilding the frame on a structure that has shifted. Detached shops and ADUs in the Austin area often mean longer material hauls and constrained access on acreage, so we scope access before the quote. We’ll give you a firm timeline in writing with the price.
Written by Spencer Odell, owner at Hale Windows Austin, serving Austin, TX since 2009.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.