New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Austin
Window replacement in Austin typically costs between $650 and $1,900 per window for a full-frame vinyl replacement, and $350 to $900 for a glass-only replacement in the existing frame. Most Austin homes we see were built between 1960 and 1990, which means original single-pane aluminum windows that have been cooking in Texas sun for three or four decades. We serve the whole Austin metro, from Mueller to Travis Heights to the ranch tracts off Metric Boulevard, and our crews know what this city’s housing stock actually looks like under the surface. If you’re seeing fogged glass, rot at the sills, or windows that won’t seal, call (254) 736-6486 and we’ll give you a written price before anything gets touched.
Why Hale Windows Austin Is Austin’s Preferred Window Replacement Company
We’ve been doing window work in Austin since 2009, and the homes here teach you things you can’t learn from a product catalog. Austin Stone veneer, brick-veneer ranches from the 1970s, modern infill with floor-to-ceiling glass in Mueller: each one demands a different flashing approach, a different framing strategy, and a different eye for what the Austin climate will do to it in five years. Homeowners across Austin tell us the same thing on repeat: they want to know who’s coming to the house before the truck pulls up. That’s exactly why we built the Threshold Standard. Every tech who comes to your Austin home is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the visit. You’ll know exactly who is at the door before you open it.
We’re independently owned and operated, part of the Threshold Group family of home-service brands. That independence matters in a city where a lot of window work gets subbed out to whatever crew is available that week. Our Austin schedule is run by a live person who answers the phone 24 hours a day, 7 days a week. No voicemail, no callback queue. When you call about window replacement in Austin, you get a human on the line.
Window Replacement Company in Austin
A window replacement company in Austin has to handle two very different jobs well: the quick, clean install on a newer home and the messy, structural excavation that an older Austin home always seems to turn into. The second one is where the work actually happens. We send a tech out to inspect the rough opening before we ever write your final scope, because what’s behind the trim on a 1978 brick-veneer ranch in north Austin is rarely what the homeowner expects.
Inspection-First Pricing
Before any contract is signed, we open up one window and look at the framing, the flashing, the WRB (weather-resistant barrier), and the rough opening dimensions. That inspection drives the written price. If we find rotted jambs, undersized openings, or missing drip caps, we write allowances into the contract up front, not after the fact. A written price is in your hands before any work starts, every time, on every job.
Permit-Triggered Code Upgrades
When the City of Austin permit inspection flags outdated framing or wiring near a window opening, that upgrade gets addressed before we close the wall. We don’t leave a permit open with a surprise attached. Any code-triggered work is priced and approved in writing before we touch it. That’s the difference between a company that knows Austin’s older housing stock and one that hopes nobody looks behind the drywall.
Window Glass Replacement in Austin
Window glass replacement in Austin is often the right fix when the frame is still solid but the insulated glass unit has failed. You’ll know it when you see it: fog between the panes that never clears, a white haze on the glass, or a window that’s suddenly letting in way more afternoon heat than it used to. Austin’s intense summer sun and high humidity are brutal on IGU seals, and most 1980s and 1990s aluminum frames have lost their seal integrity by now.
Glass-Only vs. Full-Frame
If the original frame is aluminum and still square, we can often replace just the glass unit for $350 to $900 per opening. That buys you another decade in a frame that’s already there. But if the frame is warped, the sashes are rotted, or the rough opening is undersized, glass-only is a temporary patch on a structural problem. In Round Rock and north Austin especially, we see a lot of aluminum frames that look fine on the outside and are falling apart at the jamb once opened.
Low-E Glass and Austin’s Climate
We recommend low-E glass (a thin coating that blocks heat while letting light through) on almost every Austin replacement. The energy math in this city is unforgiving: a west-facing window with single-pane glass in August is a radiator pointed at your living room. Low-E insulated glass units cut that heat gain dramatically, and they hold up far better against the freeze-thaw cycles Austin has started seeing since the February 2021 storm.
Trusted Brands We Service in Austin
We install and service windows and doors from eight professional-grade product lines, and we match the product to the job rather than pushing one brand on every house. That means PGT vinyl double-hungs on a north Austin ranch one day and ES Windows on a Mueller modern the next. We stock local parts for PGT, ViewLux, and CGI windows at our Austin location, which keeps turnaround fast when a sash or a balance breaks. If you’re replacing a front door or a patio door at the same time as your windows, Therma-Tru, CWS, ECO Window Systems, and Mr-Glass round out our lineup.
Common Window Replacement Problems We See in Austin Homes
- Seal failure in insulated glass units. Austin’s humidity and sun exposure destroy IGU seals on 15-to-30-year-old windows. Fog between the panes means the gas fill is gone and the SHGC rating your original window had is long dead.
- Cracked vinyl frames and frozen sashes. The freeze-thaw cycles Austin has experienced since the February 2021 storm cause cheap vinyl frames to crack at the jamb corners. Cold air and moisture get into the wall cavity behind them.
- Rotted wood sills and jambs under old aluminum. Original 1960s-80s windows in Austin often lack a WRB behind the flange. Water wicks in along the sill, rots the wood, and nobody notices until the window falls out of square.
- Undersized rough openings on pre-1990 homes. When we pull original windows on 1970s and 1980s homes across Austin, we regularly find rough openings that are too small for a modern code-compliant unit. That requires reframing, which is exactly the kind of surprise we write into the contract as an allowance ahead of time.
Pricing for Window Replacement in Austin, TX
Full-frame vinyl replacement in Austin runs $650 to $1,900 per window, depending on the product line, the opening size, and what we find in the rough opening. Insert window replacement, where the new unit slips into the existing frame, lands between $450 and $1,200 per opening. Glass-only replacement in an existing frame ranges from $350 to $900. What moves your price is usually not the window itself. It’s the rot, the undersized framing, the missing WRB, the Austin Stone flashing that has to be custom-bent on site. We handle all of that with allowances written into your contract before work begins, so the invoice matches the quote. To get a written, line-item price for your Austin home, call (254) 736-6486 for a free estimate.
We Also Serve Cities Near Austin
While this page covers Window Replacement in Austin proper, our crews also serve Manor, Round Rock, Buda, and Hutto. If you’re in one of those cities and wondering whether Austin’s window problems are the same ones you’re seeing, the answer is usually yes: the same housing stock, the same climate, the same failed seals. Our full Window Replacement process is identical no matter where you are in the metro.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Austin
A City of Austin permit on a window replacement typically triggers a framing inspection, and if the inspector flags undersized rough openings, missing header support, or outdated wiring within the window bay, those items must be corrected before we can close the wall. We handle this by writing permit-triggered upgrade allowances into your contract before we start. You’ll know the worst-case scenario before you sign, not after. Call (254) 736-6486 for an exact quote on your home – estimates are free.
In Austin, many 1960s-80s homes are clad in irregular Austin Stone limestone veneer. Standard off-the-shelf flashing doesn’t follow the uneven stone, so a Dallas or Houston crew that mostly works on flat brick or siding will often leave gaps that leak into the wall cavity. Our Austin techs custom-bend Z-flashing on site to match the stone profile, a skill they practice weekly on homes across the city. If your home has Austin Stone, make sure whoever quotes the job knows what that means. We do.
Yes, if the original aluminum frame is still square and structurally sound, a glass-only replacement typically costs $350 to $900 per opening in the Austin and Round Rock market. We’ll inspect the frame first. If the jamb is rotted or the opening is undersized, glass-only is not a fix – it’s a patch, and we’ll tell you that straight before you spend money on it. Call (254) 736-6486 for an inspection and a written glass-only quote.
Impact-rated windows from PGT and ES Windows are built with reinforced frames and laminated glass that resist both impact and thermal stress. The freeze-thaw cycles that cracked cheap vinyl frames during the February 2021 storm don’t fatigue these frames the same way. The glass is engineered for a wider temperature swing than builder-grade glass, and the seals are rated for far more humidity exposure. For Austin’s current climate reality, they’re the closest thing to a set-and-forget window.
Yes. Window replacement in a City of Austin historic district requires a certificate of appropriateness from the Historic Landmark Commission before you can pull a permit, and the standards are strict about material, profile, and glass type. We’ve handled replacements in both Hyde Park and Travis Heights, and we’ll help you navigate the paperwork before you commit to a product. Call (254) 736-6486 to talk through what your district requires – estimates are free.
What We Find When We Open Up an Older Austin Home
On a 1978 brick-veneer ranch in north Austin off Metric Boulevard, we pulled the original single-pane aluminum windows and found the rough openings were undersized and the sashes had rotted at the jambs from years of humid summers without drip caps. Our crew installed PGT vinyl double-hungs with low-E insulated glass units, added custom Z-flashing bent on site to match the Austin Stone, and brought the openings up to current design pressure after the permit inspection flagged the outdated framing. That job was not an anomaly. It’s what we find in pre-1990 Austin homes constantly: failed flashing, missing WRB, wood rot hidden behind trim, and framing that was never meant to hold a modern insulated unit. We write every one of those possibilities into the contract as a priced allowance. You get the worst-case number in writing before we start, and if the opening comes apart worse than expected, the price was already approved. Nothing surprises you halfway through. That’s the way Spencer Odell built this company in 2009, and it’s the only way we work in Austin.
Call (254) 736-6486 today for a free estimate on window replacement in Austin. A live person answers, we’ll schedule your inspection, and you’ll have a written price before any tool comes off the truck.
Written by Spencer Odell, Owner at Hale Windows Austin, serving Austin since 2009.
Six Reasons Homeowners Choose Hale Windows Austin
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.